Top 10 Cabinet Leveling Feet – Furniture Legs

As an Amazon Associate I earn from qualifying purchases.

1. Fulton


Heavy Duty Adjustable Furniture Leg Levelers, Shop Cabinets and Furniture 4 Leveling Legs, Shelving Units, Small Foot Ideal for Tables

Fulton #ad - Easy to adjust with the included hex key wrench. This allows you to micro adjust each leg until they are perfectly level to your desired height. Using all four levelers provides you with a load capacity of approximately 600 lbs.

No more rust spots left on the floor surface. The adjustable legs have a 10mm dia. The large 1-1/2" diameter heavy duty polyethylene foot will protect your floor and block any moisture from getting to the foot. Apx. Ideal for tables, cabinets, shelving units, furniture legs and a whole lot more.3/8" shaft that adjusts from 0" to 2" in height. The unique design of the leg leveler allows for easier access to the adjustment bolt. The heavy duty leg levelers have an l-shaped mounting bracket made from a heavy gauge, plated steel that hook onto the bottom edge of you cabinet for better support and stability unlike standard levelers.
BrandFulton #ad
ManufacturerPeachtree Woodworking Supply Inc. #ad
Weight1.1 Pounds
Part NumberFulton

2. Desunia


12 Pack, Desunia Cabinet Leveler Legs, 330 Lb. Capacity per Leg, Adjusts from 3 7/8" to 6"

Desunia #ad - Just attach to the back of the kick and snap it in place. Bring on the granite! ez micro adjustability - Just turn 'em with your fingers! WAY faster than messing with wood shims. Huge height range - for kicks from 3 7/8" - 6" high. It's all here - you get 12 legs, 6 toe kick clips, and all the necessary fasteners. Ez toe kick mounting - toe kick clips are included. Heavy duty - each leg can support 330 lbs.
BrandDesunia #ad
ManufacturerDesunia #ad
Weight1.41 Pounds
Part NumberLG-HALL-110-BLK-12

3. Rok


Rok Hardware 4 Pack Heavy Duty 8000 LB Capacity Adjustable Furniture Leg Leveler

Rok #ad - Leveler pin Length: 3 Inches. The rok name is a registered trademark of Rok, Inc. Includes allen key for height adjustment. Rok brand is sold exclusively by rok hardware. When you purchase a Rok Brand product, your satisfaction is guaranteed. Holds up to 8000 lbs made of heavy duty steel with a 2000 Lb capacity Per leg leveler. And #10 x 3/4" high strength installation screws. Leg base diameter: 1-1/4" | leveler Total Height: 2-1/2".
BrandRok #ad
ManufacturerRok #ad
Weight1.15 Pounds
Part NumberROKFLHD

4. Wynn Works


Heavy Duty Adjustable Leg Leveling Glides for Furniture 12 Pack

Wynn Works #ad - Drill a 7/16" hole, tap in T-nuts and screw in leveler to the height you desire. Hard nylon glide is kind to all types of floors including wood. Easy to install. Set of 12 - 1-1/2" leg levelers with t-nuts 5/16" - 16 thread.
BrandWynn Works #ad
ManufacturerDiamond Manufacturing #ad
Part NumberDi-12-LL-BN

5. Anwenk


Cabinets, Workbench,Shelving Units and More, Anwenk Leveling Feet Heavy Duty Furniture Levelers Adjustable Table Leg Leveler w/Lock Nuts for Furniture,Table

Anwenk #ad - Heavy duty leveling feet- these are 4 heavy gauge, cabinets, plated steel furniture legs that help you adjust and level your table, workbench, shelving units, bookcase and more. The leg leveler has 7/16” wide ledger, allows the mounting bracelet hooks onto the bottom edge of furniture for better support and stability.

Versatile threaded legs- the leveling feet have heavy 3/8"-16 10mm dia shaft that adjusts height from 0" to 2-1/2". These heavy duty leg levelers hold up almost all heavy furniture you may have, without worrying about its quality. 1320lbs weight support- each leveling leg support 330lbs, 4 legs support total 1320LBs. Hex wrench for easy adjustment- 5mm hex wrench is included to allow micro adjustment on each leg until they are perfectly level to your desired height.

Package includes 4x leveling feet, 16 Installation screws, 5mm hex wrench. L-shaped mounting bracket- ensures the cabinet load is carried by the leveler, Not the screws. Free spinning foot design compensates for uneven/ irregular floors. Polyethylene cap protects floors and block moisture from getting to the foot.
BrandAnwenk #ad
ManufacturerAnwenk #ad

6. Anwenk


Large Base,w/ 4 Felt Pads 4 Pack, Leveling Feet for Tables Chairs Cabinets Sofa Raiser, Heavy Duty Furniture Levelers Adjustable Furniture Legs Levelers, T- Nut Kit 3/8”-16 Thread, Support 1320LBs

Anwenk #ad - Heavy duty & large furniture leg levelers- allow easy leveling of furniture at home, school or café, restaurant, office, to match in same height. They allow raising your furniture, and help slide your furniture at ease ! Easy installation- for furniture legs with existing 3/8"-16 thread, pre-drill a 1/2” hole and insert the t-nut for universal installation, simply screw in the leg leveler to adjust the height.

Comes with separate high density thick felt for hardwood floor to protect floor from scratches or harsh noises. Heavy duty & 1320lbs max support- commercial quality furniture levelers, t-nuts and thread insert are made of steel that support over 330LBs per feet, so a set of four can support furniture 1320LBs! For all floors- universal nylon bottom that work for all floors such as hardwood/tile/carpeting floors.

Adjustable leveling feet - 1. 75” long steel insert with 3/8-16” thread; large commercial quality 1 3/8" Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability. Or, screw in the leg levelers and adjust to the desired height.
BrandAnwenk #ad
ManufacturerFurniture Levelers 4P #ad

7. Impromech Hardware


Heavy Duty Furniture Leveler Tee Nut Kit – Set of 4-3/8-16 Non-Skid Leg Levelers for Cabinets or Tables to Adjust Height of The Legs or Feet Jam Nuts to Stabilize Each Foot Kit with 4 Prong T-Nuts

Impromech Hardware #ad - 4 prong 3/8-16 zinc Plated Tee Nuts. Jam nuts are included to Lock and Stabilize Leveler. Set of 4 – adjustable heavy duty leveling Feet - 3/8-16 Thread with 1 3/8 inches of Adjustment. Slot on the top and a Nut on the Base of Foot to Adjust Height. 1 11/16 inch non skid tpr rubber like Base with Steel Nickle Plated Cover Shell.
BrandImpromech Hardware #ad
ManufacturerImpromech #ad

8. tamu


2000 LbsSet of 4, Heavy Duty Adjustable Furniture Leg Leveler w/Lock Hexagon Nuts

tamu #ad - Multipurpose-it is good for tables, furniture legs and a whole lot more. And also can be used for outside furniture and perfect for the workshop or garage, shelving units, cabinets, especially if vibrating machinery is involved.

Easy to adjust- adjust with the included-inner hex key Wrench. The unique design of the leg leveler allows for easier access to the adjustment bolt. Leveler total Height: 3 Inches. Leg base diameter: 1-1/4 Inches. 2 inches Height Adjustable. Base with plastic protective cap can protects floors and block any moisture from getting to the foot. Heavy duty-set of four levelers can holds up to 2000 lbs.

This will be allows to micro adjust each leg until they are perfectly level to your desired height. You can get 4 heavy duty leg levelers w/lock nuts, 32 Installation screws, one 5mm inner hexagon spanner. Free spinning foot - inner hexagon spanner for adjust, Compensates for irregular floors. No more rust spots left on the floor surface.
Brandtamu #ad
Manufacturertamu #ad

9. Antrader


Workbench, w/Corner Protector Guard Brackets, Antrader 4 Pack Heavy Duty 2000 LB. Capacity Leveler Legs, Cabinets, Adjustable Leveling Feet for Furniture

Antrader #ad - Pivoting steel base is capped in polyethylene for carpet and floor protection. 1-4/5" tall leveler 4/5" base. Set of four levelers has a load capacity of 1000 lbs. With 1-3/5" x 1-3/5" corner Protector Edge Guard. Perfect for cabinets, tables, or shelving units。. 1/4"8mm thread, swivel/Tilting base with Nylon Glide. Made of heavy gauge, plated steel.
BrandAntrader #ad
ManufacturerGuangzhou Openfind Electronic Commerce CO., LTD #ad

10. RilexAwhile


4 Pack, Adjustable Furniture Leg Foot, RilexAwhile Hardware Casters Glides Height Cabinet Leveling for Kitchen Bathroom

RilexAwhile #ad - Color: black; total size: 74mmx97mm/2. 91''x3. 81''d x H. Adjustable height range: 97mm-135mm/3. 81''-5. 31''; install Screw Dia: 4. 5mm/017''. Widely applied to a humid environment room like kitchen, bathroom, to prevent ground water corrosion carbinet. Item name: adjustable Furniture Leg Foot; Material: Plastic. Package included: 4 pack x furniture Adjustable Leg Foot; We offer 30 days money back guarrantee and easy to reach friendly customer service.
BrandRilexAwhile #ad
ManufacturerRilexAwhile #ad
Part Numberre412806