Top 9 UpCut Spiral Router Bit Set – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. MLCS

#ad

MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece

#ad
MLCS #ad - Remove sawdust and wood chips from plunge cuts with upward shearing. Solid micro grain carbide cuts smooth and stays sharp. 1/4-inch and 1/2-Inch shanks. Perfect for deep mortises and cutting dadoes in a router table. 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter.
BrandMLCS #ad
ManufacturerMLCS #ad
Part Number200
Model200

2. Freud-Diablo

#ad

Freud 5 Piece Up Spiral Bit Set 90-150

#ad
Freud-Diablo #ad - Use on cnc and other automatic routers as well as hand-held and tablemounted portable routers. Set comes in freud’s unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe. Cuts all composition materials, plywoods, hardwoods, and softwoods.
BrandFreud-Diablo #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight1.73 Pounds
Width1 Inches
Part Number90-150
Model90-150

3. Yonico

#ad

Yonico Router Bits CNC End Mill Solid Carbide Spiral 2 Flute Upcut 1/4-Inch Dia. 1/4-Inch Shank 31215-SC

#ad
Yonico #ad - For standard cnc milling and routing where material removal and efficiency is required. Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool. For use on cnc, table mount and handheld routers. Polished to a mirror finish from a solid carbide rod for precision & accuracy. Used for: standard milling, dadoing, and boring.
BrandYonico #ad
ManufacturerPrecision Bits.com #ad
Height0.25 Inches
Length2.5 Inches
Weight0.02 Pounds
Width0.25 Inches
Part Number31215-SC
Model31215-SC
WarrantyLimited Lifetime Warranty

4. HQMaster

#ad

HQMaster CNC Router Bits 1/8" Shank CNC Bit End Mill Flat Nose Carbide Endmill Two Flute 3.175mm Spiral Upcut Milling Cutter Tool Set for Wood PVC MDF Hardwood 10Pcs

#ad
HQMaster #ad - Dimensions: 1/8" 3. 175mm. Cutting edge diameter, 17mm. High efficiency: these bits own sharp edge which is able for fast engraving that makes high efficiency, durable, high precision and not easy to break.

Range of processing: for carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, PVC, acrylic, ABS, resin, plastics, nylon, 3D relief sculpturing, hardwood etc. Ideal for three-dimensional sculpture, density board, plywood, wood, surface machining, etc. Overall length, 1/8" 3. 175mm. Cutting edge length/flute length, 38. 5mm. It is smokeless and burr-free while processing. Package contents: 10pcs solid carbide spiral upcut bits assorted in storage case. Perfect cutting: the design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
BrandHQMaster #ad
ManufacturerHQMaster #ad
Weight0.1 Pounds
Part NumberHQ-6979

5. HQMaster

#ad

HQMaster CNC Router Bit 10 Pack 1/8” Shank Spiral Upcut Router Bit 1 Flute End Mill Set Milling Cutter 3.175mm Cutting Single Flute Tungsten Steel Engraving Tool for MDF Acrylic PVC Wood Density Board

#ad
HQMaster #ad - Dimensions -- diameter : 1/8" 3. 175mm; cutting diameter: 3. 175mm; cutting edge length cEL/flute length: 25mm; overall length OAL: 50mm. Package contents -- 10pcs tungsten steel bits assorted in a plastic storage case.

High efficiency -- these bits own sharp edge which is able for fast engraving that makes high efficiency; durable, high precision and not easy to break; it is smokeless and burr-free while processing. Perfect cutting -- the design of single flute, larger spiral chip space and mirror polishing of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal. Range of processing -- used for cutting/engraving/carving/drilling/sculpturing/milling in materials like MDF, plastics, wood, ABS, PVC expansion sheet, PP, density board, acrylic, PVC, solid wood, etc.
BrandHQMaster #ad
ManufacturerHQMaster #ad
Height0.31 Inches
Length2.36 Inches
Width2.17 Inches
Part NumberHQ-5073
ModelHQ-5073

6. Whiteside Router Bits

#ad

Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Whiteside router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM. Industrial Quality.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Weight0.06 Pounds
Width3 Inches
Part NumberRU2100
ModelRU2100

7. SpeTool

#ad

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits. Industrial quality control to ensure best performance. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/4-U

8. Freud

#ad

Freud 1/4" Dia. Solid Carbide Up Spiral Bit with 1/4" Shank 75-102

#ad
Freud #ad - Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. D 1/4", cutting length h 1", 2 Flutes, 1/4" Shank. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Overall dia.
BrandFreud #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight0.08 Pounds
Width1 Inches
Part Number75-102
Model75-102

9. SpeTool

#ad

SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 4 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Industrial quality control to ensure best performance. Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 1-3/4 inch cutting length, 4 inch for total length. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPL-3/8-1/2-U