Top 9 Solution Weld Rods 1 Pack 10 Rods – Arc Welding Rods

As an Amazon Associate I earn from qualifying purchases.

1. SIMPLE WELDING RODS X

#ad

Simple Welding Rods USA Made, From Simple Solution Now, 10 Rods, Aluminum Brazing/Welding Rods, Make Your Repair Stronger Than The Parent Metal Every Time

#ad
SIMPLE WELDING RODS X #ad - Usa made - simple welding rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch. Superior performance - much lower working temperature than the vast majority of comparable products 728 deg F / 387 deg C lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts.

No-nonsense, 39, 000 psi tensile strength & 60, 000 - 75, 000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast. Gets the job done - no need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily.

It's never been easier. No flux - works with aluminum, brass & most non-ferrous non-magnetic metals does not work with steel except for galvanized steel lets you apply quickly & easily with any handheld torch – Oxyacetylene, bronze, zinc, aluminum alloy, copper, die-cast, titanium, nickel, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do. Dependable - make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do.
BrandSIMPLE WELDING RODS X #ad
ManufacturerSimple Solution Now LLC #ad
Part NumberSSN 35157
ModelSSN 3515716

2. LZSDLP

#ad

Solution Welding Flux-Cored Rods No Flux Required, Super Low Melting Point Stonger Than Parent Metal Excellent Corrosion Resistance10PCS

#ad
LZSDLP #ad - With low melting point647℃~658℃, high thermal conductivity, great weldability and corrosion resistance, high electric conductivity and excellent processing performance. No need solder powder - you don't have to use other flux powder with aluminum alloy as the welding core and coating as the salt base.

Widely use in life - suitable for welding or surfacing welding alloy with high strength, good forgeability & good corrosion resistance. Very wide application - it is mainly used for argon arc welding and filling material for pure aluminum, chemistry, connection with aluminium bus and guide rod of electrolytic aluminium plant and electric power, food and so on. Very convenient and easy to weld. Light weight & small volume - size of 500*2mm & weight of 0035kg, very easy to bend & carry. Great welding effect - with full & smooth welding effect because of internal powder.
BrandLZSDLP #ad
ManufacturerLZSDLP #ad

3. Alumaloy

#ad

Easy, Aluminum Repair Rods, Simple Welding Rods, Alumaloy 10 Rods

#ad
Alumaloy #ad - Use something as simple as a propane torch on up. Each rod is approximately 1/8" x 18" long. Giving you the ability to repair more and throw out less. No worrying: alumaloy melts at 728 degrees fahrenheit giving you the ability to repair the thinnest to the thickest metals without worrying about war-page or distortion.

Alumaloy is proudly made in the United States of America! Alumaloy is a welcome addition to any tool box and 100% guaranteed to work for you. Simply clean the base metal, not the Alumaloy ROD, heat the base metal, repair your way into hundreds of dollars of savings. Unlike other specialty repair rods, Alumaloy contains no lead, no tin and no cadmium. Easy to use: alumaloy is as easy as 1-2-3. No flux needed! you can repair boats, transmission cases, molds, tools, antiques, props, bell housing, refrigeration coils, air conditioning lines, pot metal, pontoons, condensers, gutters, rims, storm doors, and so much more.

Repairs: as seen on tv - alumaloy repairs or fabricates virtually anything made of aluminum, or galvanized steel. Made in the usa: alumaloy is an environmentally friendly product. Saving money and the planet at the same time. Please refer to instructional video. Specs include: Tensile Strength lbs/ sq.
BrandAlumaloy #ad
ManufacturerAlumaloy #ad
Weight0.05 Pounds
Part NumberALUMVAR

4. Elecxlink

#ad

Chemistry, Elecxlink Aluminum Welding Rods, 20-Pack 15.8in 40cm Universal Low Temperature Aluminum Welding Cored Wire for Electric Power

#ad
Elecxlink #ad - High quality material: made of aluminum material, nontoxic, odorless and durable material. Perfect welding effect: designed with full & smooth welding effect because the item comes with internal powder, high thermal conductivity, great weldability and corrosion resistance, high electric conductivity and excellent processing performance.

Widely use: suitable for welding or surfacing welding alloy with high strength, good forgeability & good corrosion resistance. Application: include welding filler wire and spray and flame metalizing wire. It also used for argon arc welding and filling material for pure aluminum, chemistry, connection with aluminum bus and guide rod of electrolytic aluminum plant and electric power, food and so on. No solder powder needed: there is no need to use other flux powder with aluminum alloy as the welding core and coating as the salt base.
BrandElecxlink #ad
ManufacturerElecxlink #ad

5. Bernzomatic

#ad

2-Piece, Bernzomatic AL3 Aluminum Brazing/Welding Rods with 12-Inch Rods of Working Temperature 720-750 Degrees

#ad
Bernzomatic #ad - Made in United States. Brinnell hardness: 100 . Working temp: 700-750 degrees. Package weight: 001 pounds.
BrandBernzomatic #ad
ManufacturerBernzomatic Corp #ad
Height14.5 Inches
Length2 Inches
Weight0.33 Pounds
Width0.2 Inches
Part NumberAL3
ModelAL3

6. Hotop

#ad

Aluminum Welding Rods 0.08 x 13 Inch Universal Low Temperature Welding Cored Wire Aluminum Repair Rods for Electric Power Drill Tap Polish Paint Supplies 30 Pieces

#ad
Hotop #ad - Widely applicable: these easy melt welding rods are widely and mainly applied for argon arc welding and filling material for pure aluminum, chemistry, suitable for electric power, food using and more.

2 mm/ 008 inches, the length is approx. Convenient to use: you don't need to use other flux powder with aluminum alloy as the welding core and coating as salt base, the low melting point is 380 - 400 ℃, very convenient to weld. What you get: you will receive a total of 30 pieces of aluminum welding rods in this package, sufficient quantity to meet your different needs in daily life.

33 cm/ 13 inches, longer size for your using. Measurement: the diameter of the aluminum welding rod is approx. Good processing performance: our aluminum welding rod is designed with powder core of the inner part, come with nice conductivity and corrosion resistance, will give a smooth and good welding effect.
BrandHotop #ad
ManufacturerHotop #ad

7. Blue Demon

#ad

Blue Demon BDTP-125-01T Triple Play Low Temp Aluminum-Zinc Brazing Rod 1/8" x 18" 1 Lb Tube,

#ad
Blue Demon #ad - Welds zinc base metals, Brazed aluminum. One rod, 3 applications. Approximately 22 sticks per tube. Simple to use with only a propane torch. Stronger than aluminum, harder than mild steel, excellent corrosion resistance. No flux required.
BrandBlue Demon #ad
ManufacturerWelding Material Sales #ad
Height1 Inches
Length38 Inches
Weight0 Pounds
Width1 Inches
Part NumberBDTP-125-01T
ModelBDTP-125-01T

8. KMNJH

#ad

30pcs, Solution Welding Flux-cored Rods No Flux Required,Easy Melt Welding Rods Low Temperature Aluminum Welding,Super Low Melting Point Excellent Corrosion Resistance 1.6mm

#ad
KMNJH #ad - Light weight & weight of 0035kg, very easy to bend & Small VolumeSize of 500*2mm & carry. Applicationinclude welding filler wire and spray and flame metalizing wire. Perfect welding effectdesigned with full & smooth welding effect because the item comes with internal powder, great weldability and corrosion resistance, high thermal conductivity, high electric conductivity and excellent processing performance.

It also used for argon arc welding and filling material for pure aluminum, chemistry, connection with aluminium bus and guide rod of electrolytic aluminium plant and electric power, food and so on. Solution welding flux-cored rodsthe easy-to-melt welding rods are high-quality special rods that are mainly used for welding / brazing aluminum and aluminum alloys.

However, they can also be used for hard welding non-ferrous metals other than stainless steel. Very convenient and easy to weld. No need solder powderyou don't have to use other flux powder with aluminum alloy as the welding core and coating as the salt base.
BrandKMNJH #ad
ManufacturerKMNJH #ad
Part Number1

9. Darice

#ad

Single, Darice HC1060027 Syringe

#ad
Darice #ad - Recommended for bonding metal, ceramic, china, glass, fiberglass, wood, many rigid plastics, tile, concrete and stone. High-strength formula bonds wood, ceramic, glass, metal, tile, plastic and more.

The static mix nozzle delivers a uniform mixture of resin and hardener every time. Waterproof, sand able and paintable. It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating. Easy-to-use self-mixing dispenser and precision applicator. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled. Loctite epoxy instant mix 5 Minute does not shrink and is resistant to water and most common solvents.
BrandDarice #ad
ManufacturerLoctite #ad
Height9.13 Inches
Length1.13 Inches
Weight0.1 Pounds
Width4.25 Inches
Part Number1365868
ModelHC1060027