Top 9 PWM LED Dimmer – Dimmer Switches

As an Amazon Associate I earn from qualifying purchases.

1. Happyskymall

#ad

Happyskymall Marswell Ultra-compact High-Speed PWM LED Dimmer 3V, 35V 5A 90w Switching Frequency: 10K for DIY LED Panel Light LED Strip Light 1Pc

#ad
Happyskymall #ad - Default disconnection of short circuit point. Mini dc motor speed controller. By screwing the potentiometer, you can turn off power supply output.

High voltage and high current resettable fuse, overcurrent automatic disconnection, power off for cooling for a few seconds fuses automatic recovery. Wide voltage dc motor speed controller, PWM duty cycle: 1% -100%. Pwm led dimmer for diy led Panel Light LED Strip Light. Mini dc 3-35v 5a pwm motor speed controller. Please note: the operating voltage can be switched to 3-15v by bridging the connectors marked '3-15v' on the PCB. Package included : 1 x PWM Speed Dimmer Controller.
BrandHappyskymall #ad
ManufacturerHappyskymall #ad
Height0.59 Inches
Length1.65 Inches
Weight0.01 Pounds
Width0.98 Inches
Part NumberCECOMINOD007498
ModelCECOMINOD007498

2. SPIGHTDEX

#ad

Spightdex LED Strip Light Dimmer DC 5V-24V 10A PWM Wireless RF Remote Control Full Protection for Wrong Wiring Output Short Circuit Overload and Overheat for Single Color LED Strip Tape 2835 3528

#ad
SPIGHTDEX #ad - Note 5:the sp-n12 led dimmer is a constant voltage controller and can only be connected to a constant voltage lamp. Note 3:the driver be connected to the input positive and negative poles of dimmer. The controller indicator light appears yellow, indicating overload.

So please check clear with your lighting before you purchase our LED Dimmer. It is not suitable for constant current lamps. Press the remote, but the light is out of control. If the remote control is out of order, there will be a mismatch between the remote control and the controller, so it needs to be repaired. We will get back to you asap in 12 hours. Please contact us if you have any questions for it. If the power is connected to the output end of the dimmer and the light is connected to the input end of the dimmer, the receiver indicator will flash indicate to that the command of the remote control has been accepted, the strip will always be on but not under control.

If a 24v lamp is connected to a 12v power supply, if the lamp belt is DC12V, it will not light up. Positive and negative poles be corresponding. Note 4:the factory state of the controller remote control is 1-to-1 pairing. Note 2:the voltage of the power supply should correspond to the voltage of the led strip light.
BrandSPIGHTDEX #ad
ManufacturerSPIGHTDEX #ad
Height0.6 Inches
Length3.42 Inches
Width0.95 Inches
Part NumberSP-N12-11A

3. Comidox

#ad

Comidox 4PCS Mini DC 3V 6V 12V 24V 35V PWM Motor Speed Controller Switch Module Ultra Small LED Dimmer 5A

#ad
Comidox #ad - Control power: 90W maximum. Shell size: 30mmx24mm without handle, total height: 15MM 1MM = 00393inch. Pwm duty cycle: 1%-100%, PWM frequency: 10khz. Mini wide voltage dc motor governor adopts the latest low voltage drive technology, the maximum voltage is 3-35V 3-9V input needs short circuit, the current is up to 5A, and it is equipped with self-recovery fuse, stable performance, also suitable for LED Dimming. Operating voltage : dc5v-35V, quiescent current: 0015a standby state.
BrandComidox #ad
ManufacturerComidox #ad
Part NumberCP320

4. RGBZONE

#ad

RGBZONE 12V/24V DC 30A LED PWM Dimmer Controller ON/Off Switch with Metal Shell for Single Color 5050 3538 5630LED Strip Lights Ribbon

#ad
RGBZONE #ad - Not suitable for multi-color mix Bonded LED lamps. Compatible with dc 12v and 24v led light application, single channel dimming controller for single color led lights / lights monochrome 5050, 3528 strips.

Compatible with dc 12v-24v max 30a led light application, single channel dimming controller for single color LED strip lights, that is [email protected] and [email protected] Pwm digital dimming, avoid rush current, protect your LED lights Mainly use to adjust single color LED light lamps and Led Strip. 0%-100% fully dimmable, easily adjustable brightness to suit different needs and preferences with the rotatable knob. The screw-in input and output terminals, pre-drilled mounting holes make the installation literally a breeze.
BrandRGBZONE #ad
ManufacturerRGBZONE #ad
Part NumberFB0045
ModelFB1007

5. TronicsPros

#ad

Black, TronicsPros DC 12V-24V 6A LED Strip Dimmer Switch LED Tape Dimmer Controller PWM Inline Rotary Dimmer 5.5mm x 2.1mm DC Jack for SMD 5050 3528 2835 5630 LED Ribbon LED String Light, 14.7" Long

#ad
TronicsPros #ad - Usage: this led dimmer controller is suitable for led strip light, LED ribbon, such as SMD 5050/ 3528/ 2835/ 5630 LED tape lights, LED rope light, aquarium lighting, etc.

Plug and play: standard 5. 5mm x 2. 1mm dc barrel jack male / female connectors, no cutting and soldering required, easy to install and simple to use. Pwm digital dimming technology: 0% - 100% dimming, stepless dimming, no flickers at low brightness, very smooth. Easy to operate: this led dimmer switch is knob-operated control. Working current: less than 6A. Working voltage: dc 12v-24V. Just rotate the knob to adjust the brightness or simply turn on/off the lights.
BrandTronicsPros #ad
ManufacturerTronicsPros #ad

6. SuperlightingLED

#ad

DC12V/24V 20A 2,000Hz LED Dimmer Controller Brightness Adjustable for Quad Row LED Strip Light

#ad
SuperlightingLED #ad - Logarithmic or linear dimming curve selectable. Digital numeric display, visible dimming level. Pwm frequency 250hz, 500hz, 000hz or 8, 2, 000Hz selectable. High load current up to 20A.
BrandSuperlightingLED #ad
ManufacturerSuperLightingLED #ad

7. InduSKY

#ad

InduSKY Upgraded LED Dimmer PWM DC 12V-24V 30A Lighting Dimming Controller Single Channel + 5M 22AWG Extension Cable for Led Strips 3528 5050 Single Color + DC 12V Plugs Female Connector

#ad
InduSKY #ad - 0%-100% fully dimmable, easy adjustment of brightness through knob to meet different preferences and needs. What's more, anti-aging, it will convenient for you to install the light bar to the appropriate location.

5m extension cable suitable for 3528/5050 single color led strip ligh. Easy to usethe screw-in input and output terminals, pre-drilled mounting holes make the installation literally a breeze. 12v dc female connector: provides a simple and secure DIY solution for DC power connection, work with a power adapter or a power supply box. Upgraded led dimmer: our product uses high quality moS tube, enough power, no flicker when shooting on mobile phones.

Pwm digital dimming to avoid avoids rush current and protects your LED lights. 5m 22awg extension cable: features flame retardant, acid and alkali resistance and dampproof. Protection for led: change the brightness of the lamp by controlling the voltage and current output.
BrandInduSKY #ad
ManufacturerInduSKY #ad

8. Happyskymall

#ad

DIY LED U-Home High-Speed PWM Dimmer 1Pc 15A 6V-90V 1000W Switching Frequency:15K Standby 0.005A for DIY Panel LED Strip Light15A, 1Pc

#ad
Happyskymall #ad - The overload and short circuit protecting current is 20a. The maximum output power: 1000W. Input supply voltage: dc 6v-90v. The maximum continuous output current: 15A tested, its real current could be reach ca.

As an led lighting supplier, we've found that it does an excellent job at controlling the brightness of LED strips, as its high operating frequency minimizes the chance of headaches or eye strain which slower speed dimmers may cause. It also helps to avoid flicker when viewed through a camera. Size l*w*h: 6cm x 5. 5cm x 2. 8cm. Static current: 0005 a standby pwm frequency: 15kHz. Package include: 1 x 15A dimmer. Duty cycle adjustable: 0%-100% the operation environment temperature: -20℃-40℃. This ultra compact pwm controller operates at high speed, making it useful for a variety of applications. 8-10a.
BrandHappyskymall #ad
ManufacturerHappyskymall #ad
Part NumberDimmer

9. INHDBOX

#ad

LED TOUCH Dimmer Control,RF Wireless Control Brightness LED Dimmer Switch,INHDBOX LED Strips Dimmer PWM 12 / 24V to 18A Touch RF Remote Controller Regulator

#ad
INHDBOX #ad - Package include:1 ×dimmer, 1×wireless touch controller, 1×user's guide, 1×wiping cloth. Dimmer-suitable for single color led strips in 12v / 24V DC or PWM dimmable bulbs in 12V / 24V DC. Size:dimmer:85×80mm, wireless controller:115×57mm. Wireless controller-radio dimmer 433mhz rf remote control by touch function range: more than 20 m. 6 key control, brightness adjust, ON/OFF. Max bright. Min bright, 10% each step. Powered by 3×AAA batterynot included battery. Built-in memory will always save the last setting automatically.
BrandINHDBOX #ad
ManufacturerINHDBOX #ad
Part NumberFC1132