As an Amazon Associate I earn from qualifying purchases.





Each blade is engineered to work at 5, 500 rpm and a maximum cutting depth of 1" to 1-1/4 inch Max RPM: 5, 500; Ratio of 65:1. Able to cut 2-3 more concrete than lower quality blades dues to premium Bond that provide the optimal cut-to-wear ratio, cut precision, allowing you to cut longer, optimized for balanced cut life, power demands & heat buildup, cut rate, consistently precise with moderate power demands with the lowest heat buildup in the industry.



1. MK Morse
#ad
RB618T50 400428-MKM 050326400428, multi, 50-pack, Mk Morse
#adMK Morse #ad - Country of Origin: China. Package Quantity: 1. Package dimensions: 3. 0 cms l x 4. 7 cms w x 17. 4 cms H. Product Type: Tools.More information #ad
Brand | MK Morse #ad |
Manufacturer | MK Morse #ad |
Height | 1 Inches |
Length | 1 Inches |
Weight | 1.96 Pounds |
Width | 1 Inches |
Part Number | RB618T50 |
Model | RB618T50 |
More information #ad
2. MK Morse
#ad
101318 CSM1466NSC Metal Devil NXT Circular Saw Blade 14-Inch Diameter, 1-Inch Arbor, 66 Teeth, for Steel Cutting Multi, MK Morse
#adMK Morse #ad - Model no: csm1466NSC. Power source type: Manual. Package weight: 3. 85 pounds. Included components: circ blade 14" 66T NXT STEEL.More information #ad
Brand | MK Morse #ad |
Manufacturer | MK Morse #ad |
Height | 1 Inches |
Length | 1 Inches |
Weight | 4 Pounds |
Width | 1 Inches |
Part Number | 101318 |
Model | CSM1466NSC |
More information #ad
3. Tenryu
#ad
Tenryu PRF-18548BW STEEL-PRO 7-1/4" Steel Cutting Carbide Tipped Saw Blade
#adTenryu #ad - These blades are for use on low RPM "dry-cut" chop saws only. Also used on ripping blades. Cuts thick up to 1/8-Inch and thin. High quality cuts without the clouds of dust and scorch marks associated with friction blades.More information #ad
Atbalternate top bevel: Typical for cross-grain. Our most popular steel-Pro. Rugged plates and specially formulated carbide tips with a special tooth grind for fast, clean cuts.Brand | Tenryu #ad |
Manufacturer | Tenryu #ad |
Weight | 0.5 Pounds |
Part Number | TEN PRF-18548BW |
More information #ad
4. MK Morse
#ad
1-15/16"" Cutting Depth", one size, "MK Morse MHST16 1"" Carbide Tip Hole Saw, multi
#adMK Morse #ad - New exterior red coating, reduces side wall friction for efficient cutting. New cap reduces runout and vibration. New side slot, increased leverage for aster, easier slug removal.More information #ad
Cutting depth increased 18 percent over AV MHST16. Patent pending tooth set design, optimized to remove material faster.Brand | MK Morse #ad |
Manufacturer | MK Morse #ad |
Height | 3.88 Inches |
Length | 1.63 Inches |
Weight | 0.13 Pounds |
Width | 1.63 Inches |
Part Number | MHST16 |
Model | MHST16 |
More information #ad
5. MK Morse
#ad
MK Morse TACLKIT1 Real McCoy Bi-Metal Hole Saw Lock Installation Kit
#adMK Morse #ad - Attached pass-through shank arbor is convenient and time-saving. M3 cutting edge is longer lasting. Variable pitch positive rake teeth reduce vibration and clear chips to improve cutting speed. 1-1/2" cutting depth cuts through 2 X 4's. Teeth are shock resistant.More information #ad
Brand | MK Morse #ad |
Manufacturer | MK Morse #ad |
Height | 2.5 Inches |
Length | 7.6 Inches |
Weight | 1 Pounds |
Width | 5.75 Inches |
Part Number | TACLKIT1 |
Model | TACLKIT1 |
More information #ad
6. XtremepowerUS
#ad
XtremepowerUS Multi-Purpose 16" inch Diamond Blade Metal Steel Iron Cut Off Saw Wheel Abrasive, 1" Arbor Ultra Fast Cutting Blade
#adXtremepowerUS #ad - Can be used for ferrous metals, stainless steel, iron, rebar, steel, copper, and other high tensile alloy. Vacuum brazed technology for a longer life span and maintains the blade's diameter.Each blade is engineered to work at 5, 500 rpm and a maximum cutting depth of 1" to 1-1/4 inch Max RPM: 5, 500; Ratio of 65:1. Able to cut 2-3 more concrete than lower quality blades dues to premium Bond that provide the optimal cut-to-wear ratio, cut precision, allowing you to cut longer, optimized for balanced cut life, power demands & heat buildup, cut rate, consistently precise with moderate power demands with the lowest heat buildup in the industry.
More information #ad
Longer, faster and Reliably than other blades that may warp or prematurely wear.Brand | XtremepowerUS #ad |
Manufacturer | XtremepowerUS #ad |
Weight | 2 Pounds |
Part Number | 00511 |
More information #ad
7. MK Morse
#ad
One size, MK Morse 139038-MKM 050326139038, multi
#adMK Morse #ad - Durable, heavy-duty, carbon steel arbors come complete with pilot drills. Arbor 7/16 inch hex, pin arbor ; thread size - 5 / 8 - 18 ; fits Saws - 1 1/4 inch - 6 inch.More information #ad
Hex arbors with non-slit jaw slots are positive drive. Sds arbors are used in tools having SDS chucks, to drive hole saws in rotary hammers or hammer drills. Adapt morse hole saws to any power drill used by professionals.Brand | MK Morse #ad |
Manufacturer | MK Morse #ad |
Height | 5 Inches |
Length | 1.63 Inches |
Weight | 0.15 Pounds |
Width | 1.63 Inches |
Part Number | MA45PS |
Model | MA45PS |
More information #ad
8. Andersen Windows
#ad
Andersen Fwh68 Hinged Door, Active Door Panel 3-point Lock Mechanism 1988 to Present
#adAndersen Windows #ad - Lock mechanism is universal and used for both left and right hinged patio doors. The passive door panel requires a different lock mechanism. This lock mechanism fits in the vertical edge of the main active door panel.More information #ad
This stainless steel active lock mechanism replaces the gold colored zinc dichromate lock mechanism part number 2579771. Fits 6' 8" high frenchwood hinged Patio Doors with a visible glass height of 63-1/2".Brand | Andersen Windows #ad |
Manufacturer | Andersen #ad |
Part Number | 2579771 |
More information #ad
9. MK Morse
#ad
5/8-Inch Arbor, 7-1/4-Inch Diameter, Aluminum Application, MK Morse CSM72560NAC Metal Devil Circular Saw Blade, 60 TPI
#adMK Morse #ad - Cuts through aluminum without premature chipping of teeth. Made in usa and pacaged 1 per blister pack. Smooth cut finish, smooth custs of aluminum materials with less burrs or ripped surfaces.More information #ad
Fast cuts, quick accurate custs on all aluminum shapes. Eliminates virtually all hot sparks abrasive dust grit scorched surfaces and burns that require additional finishing. Nxt tip desing minimizes stress on carbides resulting in long life.Brand | MK Morse #ad |
Manufacturer | MK Morse #ad |
Height | 0.13 Inches |
Length | 9.75 Inches |
Width | 8.75 Inches |
Part Number | 101615 |
Model | CSM72560NAC |
More information #ad