Top 9 Leecraft RIDGID R4512 – Table Saw Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Leecraft


LEECRAFT RIDGID R4512 Table Saw Zero-Clearance Blade Insert

Leecraft #ad - Zero-clearance blade insert with riving knife slot. Durable phelnolic construction. Coated surface for friction free operation. 15-1/8" x 3-3/4" x 1/8". Fits ridgid r4512 professional Table Saw.
BrandLeecraft #ad
ManufacturerLeecraft #ad
Height3 Inches
Length8 Inches
Weight1.09 Pounds
Width3 Inches
Part NumberRG-5

2. Leecraft


LEECRAFT RIDGID R4512 Table Saw Zero-Clearance Dado Insert

Leecraft #ad - 15-1/8" x 3-3/4" x 1/8". Durable phenolic construction. Coated surface for friction free operation. Fits ridgid r4512 professional Table Saw. Zero-clearance dado insert with no riving knife slot.
BrandLeecraft #ad
ManufacturerLeecraft #ad
Height1.1 Inches
Length15.5 Inches
Weight1.04 Pounds
Width4.7 Inches
Part NumberRG-6

3. Leecraft


Leecraft RG-1 Zero Clearance Table Saw Insert for Ridgid TS3650 Table Saw

Leecraft #ad - Table saw insert supports work right up to the blade for smooth, more precise cuts. Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts. Made from high-density phenolic laminate with a bonded-melamine surface. Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering. Leecraft's lifetime warranty; designed for Rigid table saw with carbide-tipped blades only.
BrandLeecraft #ad
ManufacturerLeecraft #ad
Height1 Inches
Length14 Inches
Weight1.22 Pounds
Width3.8 Inches
Part NumberRG-1



POWERTEC 71420 Table Saw Dado Insert Compatible with Ridgid R4512 10 inch Cast Iron Table Saw

POWERTEC #ad - Secure placement: comes with non-countersunk adjustment holes designed to provide perfect alignment, and is held in place by a tab that clips the back of the plate to the table, preventing your table saw throat plate from popping up while in use.

Includes: 1 dado insert for Ridgid R4512 Table Saw. Removable: possesses a built-in a finger hole conveniently located away from the blade, allowing you to safely lift up, pull out and detach the insert when needed. Function: serves as a premium replacement for Ridgid R4512 dado throat plate item # 080035003093. Design features: this solid iron insert flaunts optimal flatness for a leveled application without the hassle of making constant adjustments, plus it’s constructed with a smooth, gloss finish that makes it easier to feed and slide your wood across onto the saw.
ManufacturerPOWERTEC #ad
Height0.81 Inches
Length15.81 Inches
Width4.44 Inches
Part Number71420

5. Emedco


Cutting Cap.: 1/4", Midget Tubing Cutters, 1-1/8", Ridgid

Emedco #ad - Easy control cutter. Std. Of wheels: 1, 1 1/8 in max, applicable Materials: Aluminum, Cut Type: Wheel Cut, Wt.1/2 lb. Ridgid - midget Tubing Cutters. Wheel: e-3469, mechanism: adjustable screw, cutting cap. 1/4 in min, brass, applications: tube, handle type: screw knob, plastic, Cutting Direction: Straight, copper, No.
BrandEmedco #ad
ManufacturerRidgid Tool Company #ad
Height1 Inches
Length3.25 Inches
Weight0.49 Pounds
Width2 Inches
Part Number40617
WarrantyRidgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

6. Craftsman


CRAFTSMAN V20* Cordless Drill Combo Kit, 2 Tool CMCK200C2

Craftsman #ad - Cmcd700: speed: 2 speed gearbox ranging from 0-350 RPM and 0-1, 500 RPM for speed of application. Improved visibility: Both units feature an LED light for improved visibility. Cmcd700: powerful motor: provides 280 uwO of power for demanding drilling and fastening tasks. Compact design: compact designs and contoured over-molded handles make working in tight spaces easier and more comfortable. Cmcf800: easy bit change: features a drop and load one handed bit change. Of torque running at 2, 100 BPM for heavy duty fastening tasks. Cmcf800: max torque: provides 1, 800 rpm and 3, 460 in-lbs.
BrandCraftsman #ad
ManufacturerCRAFTSMAN #ad
Height11 Inches
Length15.5 Inches
Weight9.15 Pounds
Width4.5 Inches
Part NumberCMCK200C2



LONTAN, 10 Pairs Soft Close Drawer Slides 20in, SL4502S3-20 Ball Bearing and Full Extension Dresser Drawer Slides 100lb Capacity Heavy Duty Drawer Slides for Cabinet

LONTAN #ad - Measurements: length:20inch500mm; width:1. 77inch45mm; thickness: 1/2inch12. 7mm; load-bearing capacity: 100 LB. Each drawer slides wrapped individually with fine package. You only need to gently press the buckle, which is convenient and labor-saving.

Solid ball bearing ensure sooth opening and closing, can serve you many years. No risk. What you get: you would get 10 pairs of 20in drawer slides, mounting screws and instruction which make installation easier. You would feel the quality when you receive. If you find any quality problem on our drawer sides, please feel free to contact us, we promise solve it until you are satisfied. Moreover, enough for 10 drawer, you would get smoother drawers. You would feel the quality when you receive.

Excellent after-sale service: we focus on quality and after-service. Easy to install: our drawer slides are fitted with nylon detachable snaps for easy installation or removal of the drawer slides. Please choose the right size before you purchase. Replacements or other solutions would be provided for you. Material :lontan drawer slides are made of high grade cold-rolled steel with zinc plated finish, heavy-duty and durable.
BrandLONTAN #ad
ManufacturerLONTAN #ad
Part NumberSL4502S3-20

8. Leecraft


2400LS and 2410LS Colors May Vary, Leecraft RG-2 Zero Clearance Insert for RIDGID TS2400-1

Leecraft #ad - High density phenolic laminate. Frictionless. 1/2" thick. Table saw insert for ridgid jobsite saws models TS2400-1, TS2400LS, and TS2410LS.
BrandLeecraft #ad
ManufacturerLeecraft #ad
Height0.9 Inches
Length14.1 Inches
Weight1.12 Pounds
Width4.75 Inches
Part NumberRG-2



POWERTEC 70136 4-Inch Hose to 2-1/2 Inch Hose Cone Reducer

POWERTEC #ad - Function: a handy double sided adapter that allows you to step down from your larger 4” dust collection hose to a smaller 2-1/2 shop vacuum hose branch line. Please note: this cone reducer is specifically designed to work exclusively with 4” and 2-1/2” hoses | It is NOT intended to fit or accommodate a 2-1/2” OD or 4” OD dust collection equipment port directly which would require POWERTEC 70149 or 70148 Flex Cuffs.

Dimensions: 4” nominal od end measures 3-61/64” od and 3-41/64” id; 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID. The 2-1/2 in. Opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners. Premium: made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection. Includes: 4” to 2 1/2” Dust Collection Hose Reducer.
ManufacturerSouthern Technology LLC #ad
Height4 Inches
Length4 Inches
Weight0.2 Pounds
Width4 Inches
Part Number70136