Top 9 Hot Water Heater Drain Valve – Water Heaters & Parts

As an Amazon Associate I earn from qualifying purchases.

1. House Mods

#ad

2 inch Shank, Ball Valve, House Mods HMP010 Brass 3/4" MIP Water Heater Replacement Drain valveFull Port

#ad
House Mods #ad - This model: hmp010 has 2 inch long shank, please buy model hmp011. Not for use under freezing temperature. Enlarged octagon nut: Easy to install with a pipe wrench, do not over-tighten. Lead free compliant brass body, for 3 inch shank, 2 inch shank, 304 Stainless Steel Ball Valve, Fits Water Heater Drain Port up to 1-1/2" Deep. Big handle: make sure you have enough room to install. Full port ball valve: 19 mm flow Opening, Fast Drain, Clean out larger debris and easy to unclog. Heavy and heavy duty: Net Wight: 095 lb.
BrandHouse Mods #ad
ManufacturerOLDEGG Innovations, LLC #ad
Part NumberHMP010

2. Eastman

#ad

0.7 x 0.75 x 2, Eastman 60092LF Water Heater Drain Valve, Brass

#ad
Eastman #ad - Constructed of a high-quality, durable brass that provides an anti-leak compression hold for hot water. Compliant with the safe Drinking Water and Toxic Enforcement Act and lead-free plumbing laws. Features a 2-1/4 inch shank designed to help drain water from the water heater tank during cleaning. The water heater drain valve is equipped with 3/4 inch Male Inlet Pipe MIP x 3/4 inch Male Hose Thread MHT connections. All necessary components are included for an easy installation.
BrandEastman #ad
ManufacturerEZ-FLO #ad
Height0.7 Inches
Length2 Inches
Weight0.03 Pounds
Width0.75 Inches
Part Number60092LF
Model60092LF

3. Rheem

#ad

Rheem SP12039 Poly Drain Valve,Small

#ad
Rheem #ad - For best results, use only Rheem replacement parts for repairing your Rheem Water Heater. Kits which contain this part: 45W382, SP13266. Garden hose fitting size - actual in. 1-1/16, handle Type: Handgrip. Body material: poly, shank length in. 2-1/4, tank fitting size - NPT in. 3/4, garden hose fitting Size - NHR Nominal in. 3/4.
BrandRheem #ad
ManufacturerRheem #ad
Height2 Inches
Length8 Inches
Weight0.15 Pounds
Width4.5 Inches
Part NumberSP12039
ModelSP12039

4. LASCO

#ad

LASCO 40-0911 Plastic Water Heater Drain Valve with 5/8-Inch Shank 3/4-Inch Male Pipe

#ad
LASCO #ad - Plastic water heater drain valve with 5/8-Inch shank. 3/4 male pipe thread x 3/4 male hose thread. Easy to install. For residential water heaters. Fits directly into water heater for easy draining.
BrandLASCO #ad
ManufacturerLASCO #ad
Height2.75 Inches
Length1.57 Inches
Width2.5 Inches
Part Number40-0911
Model40-0911
Warranty1 Year Warranty

5. Unknown

#ad

Camco 10423 1/2" Temperature and Pressure Relief Valve with 4" Epoxy-Coated Probe

#ad
Unknown #ad - 1/2" - 14 npt male inlet; 1/2" - 14 npT female outlet with 4" probe. Resistant to corrosion. Csa certified. Protects water heaters from excessive water temperatures and pressure. Factory preset to 150 psi and 210 degrees Fahrenheit.
BrandUnknown #ad
ManufacturerCamco #ad
Height1.6 inches
Length11.38 inches
Weight0.5 Pounds
Width3.63 inches
Part Number10423
Model10423

6. Rheem

#ad

Rheem SP12112G Brass Drain Valve

#ad
Rheem #ad - Body material: brass, shank length in. 2-1/4, tank fitting size - NPT in. 3/4, garden hose fitting Size - NHR Nominal in. 3/4. Garden hose fitting size - actual in. 1-1/16, handle Type: screwdriver. For best results, use only Rheem replacement parts for repairing your Rheem Water Heater.
BrandRheem #ad
ManufacturerRheem #ad
Height4.5 Inches
Length8 Inches
Weight0.45 Pounds
Width2 Inches
Part NumberSP12112G
ModelSP12112G

7. Bosch Thermotechnology

#ad

Bosch Electric Mini-Tank Water Heater Tronic 3000 T 4-Gallon ES4, Shelf, Wall or Floor Mounted, Eliminate Time for Hot Water

#ad
Bosch Thermotechnology #ad - Convenient hot water heater: 4 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Independent installation: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source.

Thermal efficiency is 98%. Dimensions : 13. 75 w x 13. 75 h x 13. 5 d inches. Easily mounted: can be shelf, wall or floor mounted bracket included; simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Fast recovery rate: eliminates long waits for hot water at your sink, get on demand hot water at your every need supplies up to 2 sinks at a time. Amps 12a, volts VAC 120 Long lasting quality: this electric water heater is easy to maintain and has premium glass-lined material for a long service life.
BrandBosch Thermotechnology #ad
ManufacturerBOSCH THERMOTECHNOLOGY #ad
Height13.75 Inches
Length13.75 Inches
Weight17.3 Pounds
Width13.5 Inches
Part Number7738004997
ModelES4 Tronic 3000 T
Warranty6 year warranty on unit, 2 year warranty on parts

8. Bosch Thermotechnology

#ad

Eliminate Time for Hot Water, Shelf, Wall or Floor Mounted, Bosch Electric Mini-Tank Water Heater Tronic 3000 T 2.5-Gallon ES2.5

#ad
Bosch Thermotechnology #ad - Easily mounted: can be shelf, wall or floor mounted bracket included; simply tap into the cold water line and install the water heater directly at the sink to provide hot water.

Convenient hot water heater: 2. 5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Fast recovery rate: eliminates long waits for hot water at your sink, get on demand hot water at your every need supplies up to 2 sinks at a time. Independent installation: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source. Dimensions : 13. 75 w x 13. 75 h x 1075 d inches. Long lasting quality: this electric water heater is easy to maintain and has premium glass-lined material for a long service life. Amps 12a, volts VAC 120 Thermal efficiency is 98%.
BrandBosch Thermotechnology #ad
ManufacturerBOSCH THERMOTECHNOLOGY #ad
Height13.75 Inches
Length13.75 Inches
Weight15.5 Pounds
Width10.75 Inches
Part Number7738004996
Model7738004996
Warranty6 year warranty on unit, 2 year warranty on parts

9. Ozek

#ad

9.25" Length ¾" NPT Threads 1 Pack, Ozek RV Water Heater Magnesium Anode Rod with PTFE Tape, Compatible with Suburban and Mor-Flo Water Heater Tanks

#ad
Ozek #ad - Unlike classic aluminum zinc rods, our products are 100% for the entire family! Compatibility: these magnesium anode rods are 9. 25” long, come with ¾” npt threads and are compatible with Suburban and Mor-Flo water tanks.

Great deal package: this practical rv water heater kit includes 2 magnesium anode rods and a BONUS PTFE tape, all set for fixing up your water heater tank and optimizing its functionality! Longer life: these water heater magnesium anode rods work better than aluminum ones in attracting corrosive elements, protecting your water heater and prolonging its life span with little to no investment. In order to prolong its life and save your money and time, we offer the perfect solution! Safety comes first: these rv water heater anode rods are made from superior quality, extra-durable magnesium guaranteed to withstand the test of time.

What you need: if you’re using a water heater tank, you should keep in mind that its interior is always subjected to the corrosive action of oxygen and other elements. The rods use a 1-1/16 inch socket.
BrandOzek #ad
ManufacturerOzek #ad
Weight4.25 ounces
Part Numbero-2
Modelo-2