Top 8 Downcut Router Bit – Square Nose End Mills

As an Amazon Associate I earn from qualifying purchases.

1. HQMaster

#ad

HQMaster 1/8" Shank Downcut End Mill Sprial CNC Router Bits Down Cut Tungsten Carbide Milling Cutter Set 5pcs

#ad
HQMaster #ad - Overall length, 45mm. Cutting edge length/flute length, 17mm. Material: Solid Tungsten carbide. Clean cut & excellent edge-grinding: the design of flutes, odorless and silent during processing, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smokeless, smooth cutting and fast chip-removal.

Dimension: 1/8" shank 3. 175mm. 5pcs downcut double flute spiral cnc bit: ideal for carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, density board, Milling, resin, PVC, ABS, Roughing, plastics, Hollowing, nylon, hardwood etc. Widely used for cnc engraving, plywood, wood, acrylic, 3D sculpturing purposes. Cutting edge diameter, 1/8" 3. 175mm.
BrandHQMaster #ad
ManufacturerHQMaster #ad
Part Number3810

2. SpeTool

#ad

1/4 inch Shank Solid Carbide CNC Bits End Mill for Wood Cut Carving Engraver, SpeTool Spiral Router Bits Down Cut 1/4 inch Cutting Diameter

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. Spiral bits used for smoothly downcut groove and slots, Plunge cut leave with clean edge and top surface, Mortises, Cycles and dados, better than straight bits.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/4-D

3. Whiteside Router Bits

#ad

Whiteside Router Bits RD1600 Standard Spiral Bit with Down Cut Solid Carbide 1/8-Inch Cutting Diameter and 1/2-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Precision ground for proper balance at high RPM. Whiteside router Bits are made with Premium Carbide. Industrial Quality.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Width3 Inches
Part NumberRD1600
ModelRD1600

4. SpeTool

#ad

SpeTool Spiral Downdcut Router Bits with 1/2 inch Shank, Plunge Cut, 1/2 inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving

#ad
SpeTool #ad - Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. Industrial quality control to ensure best performance. Solid carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/2-1/2-D

5. TEMO

#ad

TEMO Carbide Downcut Inlay Router Bit 1/16 Inch 1.6 mm Diameter

#ad
TEMO #ad - Carbide downcut inlay Router Bit 1/16" dia. 1/8" shank diameter. 1. 5" length. Spiral bits give very clean cuts. Comes in convenient case with compartment for each bit. Carbide router bit remain sharp and give a superior cut on wood.
BrandTEMO #ad
ManufacturerGolden Coulee #ad
Height0.25 Inches
Length3.5 Inches
Weight2 ounces
Width3 Inches
Part Number3143

6. Freud-Diablo

#ad

Freud 1/4" Dia. Down Spiral Bit with 1/4" Shank 76-102

#ad
Freud-Diablo #ad - Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Cuts all composition materials, plywoods, hardwoods, and softwoods. Cuts all composition materials, plywoods, hardwoods, and softwoods.
BrandFreud-Diablo #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight0.06 Pounds
Width1 Inches
Part Number76-102
Model76-102

7. SpeTool

#ad

SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, Carving

#ad
SpeTool #ad - Spiral bits used for smoothly downcut groove and slots, Cycles and dados leave with clean edge and top surface, Mortises, better than straight bits. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance. Solid carbide spiral downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/8-D

8. SpeTool

#ad

SpeTool Spiral Downcut Router Bits with 3/8 inch Cutting Diameter, 1/2 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. Industrial quality control to ensure best performance. Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp. Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.
BrandSpeTool #ad
Manufacturerspetool #ad
Part NumberSP-D3/8-1/2-D