Top 10 West System Epoxy – Tile Epoxy Adhesives

As an Amazon Associate I earn from qualifying purchases.

1. West System

#ad

WEST SYSTEM 105-B Epoxy Resin Bundle with 205-B Fast Epoxy Hardener and 300 Mini Pumps Epoxy Metering Pump Set

#ad
West System #ad - 205 fast hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature. These durable polypropylene pumps provide years of dependable service. Resin viscosity is approximately 1000 centipoise at 72°F 22°C.

Pot life at 72°f 22°c is 9 to 12 minutes. Cures to a solid state in 6 to 8 hours. Convenient epoxy bundle contains one can of west system 105-b resin 126. 6 fl oz, west system 205-b fast hardener 27. 5 fl oz, and one set of calibrated 300 Mini Pumps. Minimum recommended working temperature is 40°F 4°C. One pump stroke of resin for each one pump stroke of hardener yields 08 fl oz of the exact 5:1 epoxy mix ratio.

It is useful in a majority of bonding situations, and at lower temperatures. Cures to maximum strength in 1 to 4 days. 105 epoxy resin is a clear, pale yellow, it cures to a hard, fiberglass, solid plastic with superior physical properties.205 fast hardener is not intended for clear coating. Does not contain vocs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.
BrandWest System #ad
ManufacturerWest System #ad
Height8 Inches
Length17 Inches
Width8 Inches
Part Number105B-WESTSYSTEM_K1

2. West System

#ad

West System 105-B Epoxy Resin Bundle with 206-B Slow Epoxy Hardener and 300 Mini Pumps Epoxy Metering Pump Set

#ad
West System #ad - It will wet out and bond with wood fiber, fiberglass, pale yellow, low-viscosity liquid epoxy resin. Minimum recommended working temperature is 60°F 16°C. 105 epoxy resin is a clear, it cures to a hard, solid plastic with superior physical properties.

Resin viscosity is approximately 1000 centipoise at 72°F 22°C. Includes calibrated pumps that dispense 105 resin & 206 slow hardener at the correct 5-part resin to 1-part hardener mix ratio. Excellent for coatng or bonding, this epoxy is easily modified with WEST SYSTEM fillers, including fiberglass boat repair, pigments, and additives to suit an enormous variety of construction and repair projects, strip kayak and canoe construction. Cures to a solid state in 10 to 15 hours.

206 slow hardener is not intended for clear coating. Convenient epoxy bundle contains one can of west system 105-b resin 126. 6 fl oz, west system 206-b slow hardener 27. 5 fl oz, and one set of calibrated 300 Mini Pumps. These durable polypropylene pumps provide years of dependable service. Pot life at 72°f 22°c is 20 to 25 minutes. Does not contain vocs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.
BrandWest System #ad
ManufacturerWest System #ad
Height8 Inches
Length17 Inches
Width8 Inches
Part Number105B-WESTSYSTEM_K2

3. West System

#ad

WEST SYSTEM 105-A Epoxy Resin Bundle with 205-A Fast Epoxy Hardener and 300 Mini Pumps Epoxy Metering Pump Set

#ad
West System #ad - Cures to maximum strength in 1 to 4 days. 105 epoxy resin is a clear, solid plastic with superior physical properties. Does not contain vocs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.

It will wet out and bond with wood fiber, pale yellow, fiberglass, it cures to a hard, low-viscosity liquid epoxy resin. Pot life at 72°f 22°c is 9 to 12 minutes. 205 fast hardener is a medium-viscosity epoxy curing agent. 205 fast hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature. Minimum recommended working temperature is 40°F 4°C. These durable polypropylene pumps provide years of dependable service.

Excellent for coatng or bonding, including fiberglass boat repair, and additives to suit an enormous variety of construction and repair projects, this epoxy is easily modified with wEST SYSTEM fillers, pigments, strip kayak and canoe construction.205 fast hardener is not intended for clear coating. One pump stroke of resin for each one pump stroke of hardener yields 08 fl oz of the exact 5:1 epoxy mix ratio.
BrandWest System #ad
ManufacturerWest System #ad
Height6 Inches
Length18 Inches
Width6 Inches
Part Number105A-WESTSYSTEM_K1

4. West System

#ad

WEST SYSTEM 105-A Epoxy Resin Bundle with 207-SA Special Clear Epoxy Hardener and 300 Mini Pumps Epoxy Metering Pump Set

#ad
West System #ad - Durable polypropylene pumps provide years of dependable service. Bundle includes calibrated pumps that dispense 105 Resin & 207 Extra Clear Hardener at the correct 3-part resin to 1-part hardener mix ratio with one pump stroke of each; yielding 09 fl oz. Cures to a solid state in 10 to 15 hours.

It will wet out and bond with wood fiber, it cures water clear to a hard, reinforcing fabrics and a variety of metals. Blended with 105 epoxy resin, 207 hardener will not blush or turn cloudy in humid conditions. Pot life at 72°f 22°c is 20 to 26 minutes. Minimum recommended working temperature is 60°F 16°C. Resin viscosity is approximately 1000 centipoise at 72°F 22°C. Blush-free 207 special clear hardener is an excellent choice for clear coating application. Blended with 207 extra clear hardener at a 3:1 ratio, fiberglass, solid plastic with superior physical properties.

Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings. 207 extra clear hardener is a water-clear epoxy curing agent developed for coating and fiberglass cloth application where an exceptionally clear, WEST SYSTEM 207-SB Extra Clear Hardener 10 fl oz, natural wood finish is desired. Cures to maximum strength in 4 to 7 days. Wets out without fisheyeing Excellent for clear coating yet has all the.
BrandWest System #ad
ManufacturerWest System #ad
Height4.6 Inches
Length14.1 Inches
Width12.3 Inches
Part Number105A-WESTSYSTEM_K3

5. West System

#ad

West System 105B Epoxy Resin 126.6 fl oz Bundle with 207SB Special Clear Epoxy Hardener 42.2 fl oz and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set 3 Items

#ad
West System #ad - The 105/207 epoxy Mixture cures clear and colorless. Bundle includes: west system 105a epoxy resin 32 fl oz, 207sb special Clear Epoxy Hardener 42. 2 fl oz, and 300 mini pumps Epoxy Metering Pump Set 3-Pack. West system epoxy: based on 105 epoxy resin, west system epoxy is a versatile low-viscosity epoxy system. No strong solvent odor: 105 epoxy resin is formulated without volatile solvents and does not shrink after curing.

Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin/207 Special Clear Hardener Mixture, low-viscosity epoxies. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. Resin viscosity is approximately 1000 centipoise cP at 72-degree-F 22-degree-C. Applications: three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, yet it won’t drain from vertical surfaces like the very slow curing, the final coating can be sanded the following day.

Strong physical properties: the 105/207 epoxy mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. It has excellent compatibility with paints and varnishes.
BrandWest System #ad
ManufacturerWest System #ad
Height8.7 Inches
Length12.3 Inches
Width10.4 Inches
Part Number105B-WESTSYSTEM_K3

6. West System

#ad

West System Six10 Thickened Epoxy Adhesive

#ad
West System #ad - West system six10 is a two-part, pre-thickened epoxy adhesive formulated with properties that make it perfect for many adhesive applications. Compared to other ready-to-dispense adhesives, its particular physical properties make it ideal for stitch and glue boat construction, fiberglass laminate repair and general bonding.
BrandWest System #ad
ManufacturerGougeon Brothers, Inc. #ad
Height1.95 Inches
Length10.05 Inches
Weight2 Pounds
Width2.65 Inches
Part Number610
Model610

7. West System

#ad

West System 105-A Epoxy Resin 1 qt with 206-A Slow Epoxy Hardener .44 pt + Mini Epoxy Metering Pump Set

#ad
West System #ad - It also provides adequate working time at higher shop temperatures. West system 105 epoxy resin and hardeners make up a versatile epoxy system that can be used for everything from basic, long-lasting repairs to the construction of high-performance composites.

The 300 mini pump set contains one resin pump and two hardener pumps. When combined with 105 resin in a five-part epoxy resin to one-part hardener ratio, the cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties.

Bundle includes: west system 105-a epoxy resin 1 qt with 206-A Slow Epoxy Hardener. 44 pt and mini Epoxy Metering Pump Set. Pumps mount directly on the resin and hardener containers and eliminate the mess involved with measuring by weight or volume. 206 slow hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed.
BrandWest System #ad
ManufacturerGougeon Brothers, Inc. #ad

8. West System

#ad

West System 865-4 G/5 Five Minute Epoxy Adhesive, 8 fl oz

#ad
West System #ad - Easily modified with west system fillers, additives, and pigments to suit the job at hand. May be used in spot applications to hold parts in position while standard epoxy bonds cure. Fast curing 2-part epoxy allows 3-5 minutes of working time.

Ideal viscosity allows it to penetrate porous surfaces yet it's viscous enough to bridge gaps when gluing broken objects. Since this very quick-cure epoxy is not as strong or waterproof as our 105 Resin-based epoxies or G/flex epoxies, G/5 will reduce the cured physical properties of other epoxies when blended with them. It adheres to a number of surfaces including wood, metal, fiberglass, cork, plaster, leather, glass, stone, and paper. One-to-one mix, epoxy resin/hardener system for quick repairs, no pumps required.

Easy to use, tooling and general bonding. Not recommended for long-term bonds subject to high loads or moisture. G/5 is an excellent choice for quick repairs around the house, some plastics, ceramic, high-end crafts and much more. Comes with one 4 fl oz of Resin, and one 4 fl oz of Hardener. Best for projects that will remain dry and are not subject to high loads. Adding g/5 to other west sySTEM epoxies can speed their cure time.
BrandWest System #ad
ManufacturerGougeon Brothers, Inc. #ad
Height2 Inches
Length3.45 Inches
Weight17.6 Pounds
Width7.75 Inches
Part Number865-4
Model865-4

9. West System

#ad

West System 105-B Epoxy Resin .98 gal with 205-B Fast Epoxy Hardener .86 qt and Mini Epoxy Metering Pump Set

#ad
West System #ad - It is useful in a majority of bonding situations, and at lower temperatures. The 300 mini pump set contains one resin pump and two hardener pumps. Bundle includes: west system 105-b epoxy resin.

98 gal, west system 205-B Fast Epoxy Hardener. 86 qt, west system Mini Epoxy Metering Pump Set. The combination of 105 resin/205 Fast Hardener has excellent bonding and coating properties. 205 fast hardener is a medium-viscosity epoxy curing agent. West system 105 epoxy resin and hardeners make up a versatile epoxy system that can be used for everything from basic, long-lasting repairs to the construction of high-performance composites. 205 fast hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature. Pumps mount directly on the resin and hardener containers and eliminate the mess involved with measuring by weight or volume.
BrandWest System #ad
ManufacturerGougeon Brothers, Inc. #ad

10. West Systems

#ad

205-A Hardener, West Systems Epoxy Bundle Kit, Reusable Graduated Clear Mixing Cups and Mixing Sticks, Metered Pump Set, Easy to use 105-A Resin, Disposable Gloves

#ad
West Systems #ad - West systems has earned their place as the gold standard to which other epoxy marketers compare their wares. This bundle includes west systems 105-a 32oz. 205-a 7oz. 3 mixing sticks, 2 16oz. The resin is a clear, solid plastic with superior physical properties.

Made to withstand the harsh marine environments, pale yellow, low-viscosity liquid epoxy resin that cures to a hard, the most reliable and well-balanced structural and coating epoxy. It also bonds well with a variety of metals. It is used for boat building, composite construction and repairs that require high-strength, bonding, and filling. Mixing pots, 300 metered pump kit, 2 pairs of gloves.

Based on 105 epoxy resin, waterproof coating, West System Epoxy is a versatile low-viscosity epoxy system. Time tested, fiberglass, professionally Trusted, designed to wet out and bond with wood fiber, and reinforcing fabrics. West system epoxy: west system epoxy is the world’s most reliable and widely used marine epoxy. Epoxy resin: 105 epoxy resin is the base material on which all west system 105 system epoxy compounds are built.
BrandWest Systems #ad
ManufacturerWest Systems #ad