As an Amazon Associate I earn from qualifying purchases.
Steel construction: these pin punches are made of hardened steel for wear resistance and strength.
Knurled grips: round shank is knurled for a sturdy grip and greater control As an added precaution, always wear safety goggles when using striking tools.


12-piece punch set: set contains one 1/16", 7/32", 3/16", 3/8", 5/64", 1/4", 7/16", 5/16", 1/8" 5/32", 3/32", 1/2" diameter punches. Grace usa gunsmithing Tools: Made in the USA. The punches feature three identifying machine marks to help distinguish between our regular pin punches.

General tools drive pin punches have been machined to exacting tolerances for accurate driving without damaging the pin or hole.


Solid walnut bench block keeps punches organized and generously spaced so they are easy to grasp. All punches have a classic natural finish with a dry-touch, rust-preventative coating. Pin and roll pin punches smoothly drive out or insert solid pins, hollow pins, and springs and are reverse tapered so they won't stick in workpieces.
Center punch has a sharp point that marks cast iron, brass, mild steel, aluminum, and wood with a dimpled starting spot for drilling. Solid punches are stout and powerful to loosen rusted or frozen pins and drive out rivets. Center punch has a sharp point that marks cast iron, mild steel, brass, aluminum, and wood with a dimpled starting spot for drilling. Solid punches are stout and powerful to loosen rusted or frozen pins and drive out rivets.




Roll spring punch set: made from high carbon Molybdenum Tool Steel and properly heat treated and hardened the entire length, not just the tip, with tempered striking end.
1. Starrett
#ad
1/4", S565WB, 3/16", 3/32", Starrett Drive Pin Punch Set, 5/32", Comes in Plastic Storage Case, 1/8", Made of Hardened Steel Metal, 5/16" Diameters and 4 Inch Length, 8 Pieces, 1/16", 7/32"
#adStarrett #ad - Storage case included: this center pouch set comes with a convenient, red plastic storage case for keeping your pin punches organized Each punch has its size stamped on the head. Set of 8: the starrett s565wb bulk set includes eight drive pin punches with a 4" overall length and 1/16", 7/32", 3/32", 1/8", 3/16", 1/4", 5/32", and 5/16" pin diameter sizes.Steel construction: these pin punches are made of hardened steel for wear resistance and strength.
More information #ad
Its tempered head makes it less likely to fracture from a hard, off-center blow. Pin punch uses: pin punches are tools used to insert or knock out rivets and pins in assemblies They have a metal shank on one end and a metal pin driver on the other and are typically tapped with a hammer. Knurled grips: round shank is knurled for a sturdy grip and greater control As an added precaution, always wear safety goggles when using striking tools.
Brand | Starrett #ad |
Manufacturer | Starrett #ad |
Height | 2.5 Inches |
Length | 4.5 Inches |
Weight | 0.3 Pounds |
Width | 2.5 Inches |
Part Number | S565WB |
Model | S565WB |
Warranty | 1 year |
More information #ad
2. Mayhew Tools
#ad
12-Piece Set, Mayhew Tools 62254 Pro Pilot Punch Kit
#adMayhew Tools #ad - Drives and removes roll pins and other hollow tension pins. Black oxide finish for additional rust protection. 12-piece set includes: 1/16 x 2-3/4" pilot punch, 5/64 x 3/14" pilot punch, 3/16 x 4-1/2" pilot punch, 5/32 x 4-1/2" pilot punch, 1/8 x 4" pilot punch, 3/32 x 3-1/2" pilot punch, 1/4 x 5-1/2" Pilot Punch, 3/8 x 6" pilot punch, 7/16 x 6" pilot punch, 5/16 x 6" pilot punch, 7/32 x 5" pilot punch, 1/2 x 6" Pilot Punch.More information #ad
Made in the USA; lifetime warranty. Pilot punches, an original mayhew patented design, also called a roll pin punch, are a punch that fits tightly within a roll pin.Brand | Mayhew Tools #ad |
Manufacturer | Mayhew #ad |
Height | 1.75 Inches |
Length | 9.25 Inches |
Weight | 1.71 Pounds |
Width | 3.75 Inches |
Part Number | 62254 |
Model | 62254 |
Warranty | Lifetime Warranty |
More information #ad
3. Grace USA
#ad
12 Piece, Grace USA GRRS12 Professional Steel Roll Pin Punch Set with Vinyl Pouch, Gunsmith Tools & Accessories, Black
#adGrace USA #ad - Roll pin punch: made from the highest quality High Carbon Molybdenum Tool Steel and properly heat treated to ensure long life of the punch.12-piece punch set: set contains one 1/16", 7/32", 3/16", 3/8", 5/64", 1/4", 7/16", 5/16", 1/8" 5/32", 3/32", 1/2" diameter punches. Grace usa gunsmithing Tools: Made in the USA. The punches feature three identifying machine marks to help distinguish between our regular pin punches.
More information #ad
Steel punches: incorporated reverse taper from tip of punch to help prevent punch from sticking in the work piece. Roll spring punch set: each punch is hardened the entire length with tempered striking end and are centerless ground for complete accuracy.Brand | Grace USA #ad |
Manufacturer | Pro Ears #ad |
Height | 1 Inches |
Length | 9 Inches |
Weight | 2.2 Pounds |
Width | 6 Inches |
Part Number | GRRS12 |
Model | GRRS12 |
More information #ad
4. General Tools
#ad
Grey, General Tools SPC75 Drive Pin Punches, Set of 8
#adGeneral Tools #ad - These drive pin punches are made of hardened tool steel and features knurled bodies for a better grip. The punch ends are ground square to sit flush on the top of the pin and deliver accurate pin driving.General tools drive pin punches have been machined to exacting tolerances for accurate driving without damaging the pin or hole.
More information #ad
Designed to withstand hard use, this drive pin punch is perfect in the machine shop as well as in the automotive service industry. This drive pin punch set includes 1/16, 3/32, 3/16, 7/32, 5/32, 1/4, 1/8, and 5/16 inch drive pin punches; Packed in snap button plastic case.Brand | General Tools #ad |
Manufacturer | General Tools #ad |
Height | 0.75 Inches |
Length | 5.25 Inches |
Weight | 0.66 Pounds |
Width | 5.13 Inches |
Part Number | SPC75 |
Model | SPC75 |
More information #ad
5. Proto
#ad
7PC, Stanley Proto J49007S2 Roll Pin Punch Set
#adProto #ad - One-piece design for strength and durability. Black oxide finish to help prevent rust corrosion; extending tool life and performance, Made in USA.More information #ad
Reverse taper to help prevent binding. Made from s2 steel and specially heat-treated for greater strength and durability. Modified parabolic striking end to help reduce mushrooming and chipping.Brand | Proto #ad |
Manufacturer | Stanley Proto #ad |
Height | 1.5 Inches |
Length | 9 Inches |
Width | 3.4 Inches |
Part Number | J49007S2 |
Model | J49007S2 |
More information #ad
6. TEKTON
#ad
TEKTON Punch Set with Walnut Block 18-Piece | 66564
#adTEKTON #ad - Solid walnut bench block keeps punches organized and generously spaced so they are easy to grasp. Made in USA. Pin and roll pin punches smoothly drive out or insert solid pins, hollow pins, and springs and are reverse tapered so they won't stick in work pieces.Solid walnut bench block keeps punches organized and generously spaced so they are easy to grasp. All punches have a classic natural finish with a dry-touch, rust-preventative coating. Pin and roll pin punches smoothly drive out or insert solid pins, hollow pins, and springs and are reverse tapered so they won't stick in workpieces.
More information #ad
Made in the USA. All punches have a classic natural finish with a dry-touch, rust-preventative coating. Center punch has a sharp point that marks cast iron, brass, mild steel, aluminum, and wood with a dimpled starting spot for drilling. Solid punches are stout and powerful to loosen rusted or frozen pins and drive out rivets. Center punch has a sharp point that marks cast iron, mild steel, brass, aluminum, and wood with a dimpled starting spot for drilling. Solid punches are stout and powerful to loosen rusted or frozen pins and drive out rivets.
Brand | TEKTON #ad |
Manufacturer | TEKTON #ad |
Height | 7.2 Inches |
Length | 9.7 Inches |
Weight | 2.09 Pounds |
Width | 3 Inches |
Part Number | 66564 |
Model | 66564 |
Warranty | Always Guaranteed: [email protected] |
More information #ad
7. TEKTON
#ad
8-Piece 1/16-1/4 in. | PNC93001, TEKTON Roll Pin Punch Set
#adTEKTON #ad - Individual heat treatment allows careful control of tip hardness and temper of striking end. Reverse taper with guide ball tip accurately self centers to drive out or insert hollow pins without deforming them or sticking in workpiece.More information #ad
Made from premium, high carbon steel. Made in USA. Classic natural finish has a dry-touch, rust-preventative coating. Includes 8-pc. Roll pin punches: 1/16, 3/32, 1/8, 5/32, 3/16, 5/64, 7/32, 1/4 in. Straight and true, tip is precisely machined to meet exacting tolerances.Brand | TEKTON #ad |
Manufacturer | TEKTON #ad |
Height | 0.5 Inches |
Length | 8 Inches |
Weight | 0.72 Pounds |
Width | 3.7 Inches |
Part Number | PNC93001 |
Model | PNC93001 |
Warranty | No time limits, no receipts: tekton.com/tool-help |
More information #ad
8. Grace USA
#ad
Gunsmithing, Grace USA, Brass Roll Pin Punches, Gun Care Brass Roll Pin Punch Set, 8 piece, BRP8, Gunsmith Tools & Accessories
#adGrace USA #ad - These are ideal for the gentle removal of pins from your most favorite and older guns and where great care is required. This high quality brass 8 piece pin punch set is handcrafted by Grace USA.More information #ad
The kit includes 1/16 ", 1/8", 1/4", 3/32 ", 3/16 ", 5/16 ", 5/32 and 7/32. Handcrafted in the USA. This 8 piece set comes in a vinyl pouch.Brand | Grace USA #ad |
Manufacturer | Pro Ears #ad |
Height | 12 Inches |
Length | 6 Inches |
Weight | 0.68 Pounds |
Width | 2 Inches |
Part Number | GRBRP8 |
Model | BRP-8 |
Warranty | Lifetime Guarantee |
More information #ad
9. Grace USA
#ad
7 piece, Gunsmith Tools & Accessories, Grace USA RS-7, RS7, Gunsmithing, Steel Punches, Steel Roll Spring Punch Set
#adGrace USA #ad - Roll pin punch: made from the highest quality High Carbon Molybdenum Tool Steel and properly heat treated to ensure long life of the punch. Grace usa gunsmithing Tools: Made in the USA. 7-piece punch set: set contains one 1/16", 5/64", 5/32", 1/8", 3/32", 3/16", 7/32" diameter punches.More information #ad
Roll spring punch set: this high-quality hardened steel 7-piece punch set is designed to easily remove roll pins from firearms. Steel punches: features a balled tip which helps locate the punch on the pin and protects pin ends from damage during removal or installation.Brand | Grace USA #ad |
Manufacturer | Pro Ears #ad |
Height | 8 Inches |
Length | 0.5 Inches |
Weight | 0.62 Pounds |
Width | 4 Inches |
Part Number | GRRS7 |
Model | RS-7 |
Warranty | Lifetime Guarantee |
More information #ad
10. Grace USA
#ad
Gunsmithing, Steel Punches, Short Steel Roll Set, Grace USA, 7 piece, Steel Roll Spring Punch Set, SRS7, Gunsmith Tools & Accessories, Black
#adGrace USA #ad - Round which helps stabilize punch from rolling away from the user. Small roll pin punch: the short shaft provides more control; putting your hand closer to the pin, so you don't bend a finishing punch.Roll spring punch set: made from high carbon Molybdenum Tool Steel and properly heat treated and hardened the entire length, not just the tip, with tempered striking end.
More information #ad
Hex stock: manufactured from hex stock steel vs. Packaged in a vinyl pouch for safe storage. Sport type: Hunting. Steel punches: the srs7 is designed to start the difficult roll spring/pins in motion without causing any damage to the pins or punch.Brand | Grace USA #ad |
Manufacturer | Pro Ears #ad |
Height | 1 Inches |
Length | 9.2 Inches |
Weight | 0.62 Pounds |
Width | 3.2 Inches |
Part Number | GRSRS7 |
Model | SRS7 |
Warranty | Lifetime Guarantee |
More information #ad