1. Delta
#ad
Delta Industrial 46-460 12-1/2-Inch Variable-Speed Midi Lathe
#adDelta #ad - Forward and reversing function allows the turner to achieve a superior finish. Large 12-1/2-inch swing capacity provides the largest capacity in its class.Patented belt tensioning system for easy and quick speed changes and sets the belt at the correct tension every time for maximum power transfer and longer tool life.
More information #ad
Powerful 1 hp max, 1, 725 rpm motor. Electronic variable speed with three-pulley speed ranges provide the required speeds needed to turn a project without changing belt position. Sanding a turned piece with the grain causes the wood fibers to lay down and remain rough. Drive spindle: 1 inch -8 RH TPI thread.Brand | Delta #ad |
Manufacturer | Delta #ad |
Height | 17.75 Inches |
Length | 36 Inches |
Weight | 97 Pounds |
Width | 11 Inches |
Part Number | FBA_46-460 |
Model | 46-460 |
Warranty | 5 Year Warranty |
More information #ad
2. Powermatic
#ad
Powermatic 1352001 Model 3520B 20x35-Inch Wood Lathe with RPM Digital Readout
#adPowermatic #ad - Powered by a 2-horsepower, 220-volt, variable speed motor. Wood turning lathe with digital RPM readout, 20-inch swing, and 34-1/2-inches between center.More information #ad
Made of heavy-duty cast iron, Assembly required. Accessories-include guard, face plate, wrench, tool rest, knockout rod and spindle lock.50x24x44-inches; Backed by 1-year warranty.Brand | Powermatic #ad |
Manufacturer | Powermatic #ad |
Height | 31 Inches |
Length | 55 Inches |
Weight | 682 Pounds |
Width | 27 Inches |
Part Number | 1352001 |
Model | 1352001 |
More information #ad
3. Nova
#ad
12”, Powerful Electronic 3/4 HP variable speed, Nova 71118 Comet II DR, Midi Lathe Flexible Woodworking System
#adNova #ad - Manual with parts breakdown and fasteners. You’re not limited to potentially dangerous fixed-speed steps. 3” faceplate, spur-drive center, 6” tool rest, live Tailstock Center, knockout bar, Lathe Handwheel Unit.Digital readout: quickly dial-in the correct speed for the job, material and conditions. Speed range: 250 - 4, 000 rpm with its powerful electronic variable speed motor.
More information #ad
Expandable to 42“ with optional bed extension accessory Additional purchase. Forward and reverse switch: forward and Reverse Switch offers additional flexibility with the Nova Lathe and allows you to achieve a superior finish. 12” swing over bed and 16. 5” between centers.Brand | Nova #ad |
Manufacturer | Teknatool #ad |
Height | 32.9 Inches |
Length | 8.9 Inches |
Weight | 82 Pounds |
Width | 17.8 Inches |
Part Number | 71118 |
Model | 71118 |
Warranty | WARRANTY: 1-Year Motor and Controller 2-Years Mechanical and parts |
More information #ad
4. Simple Woodturning Tools
#ad
Screws and Torx Star Wrench, PLUS Comfortable Foam Grip 17" Interchangeable Handle, Simple Woodturning Tools Full Size Set of 6 Carbide Tipped Wood Turning Lathe Tools with Carbide Inserts, USA Made
#adSimple Woodturning Tools #ad - Tools measure 12" length with 2. 5" handle tang. American made in ramsey, minnesota by Harrison Specialties, a family owned and operated CNC Machine shop. Tools are easily changed by loosening the allan set screws in the handle.More information #ad
Includes our simple swan neck Hollower, Specifically designed to reach areas inside hollow form vessels inaccessible with straight shaft tools. T15 & t20 torx star tip wrenches are included. Six carbide tipped, plus a well balanced, Foam Grip, usa made Wood Turning Tools, 17" Long Interchangeable Lathe Tool Handle.Brand | Simple Woodturning Tools #ad |
Manufacturer | Harrison Specialties LLC #ad |
Height | 5 Inches |
Length | 20 Inches |
Width | 5 Inches |
Part Number | Full Size Pkg 6 w/SR90, 1 Handle |
More information #ad
5. Robust
#ad
Robust Comfort Tool Rest 6" Wide, Standard Post
#adRobust #ad - Each tool rest is topped with a hardened steel bar which will not nick, dent and will stay smooth after years of use. Comfort rest - 6" wide - 1" Diameter - Standard Post.More information #ad
Robust tool rest are made from solid steel. Fits robust sweet 16, liberty | oneway 2036, 2016 | nova dvr, independence, 3000 | delta 16 | general 16 |stubby 750, 1000 | Woodfast 16 Lathes. Sold as tool rest only, lathe banjo not included.Brand | Robust #ad |
Manufacturer | Robust #ad |
Height | 3 Inches |
Length | 6 Inches |
Width | 6 Inches |
Part Number | RTR-06-CR-SD |
More information #ad
6. Robust
#ad
12" Wide, Robust Tool Rest for Mini Lathes, 5/8" Post
#adRobust #ad - Sold as tool rest only, lathe banjo not included. Fits midi and mini Lathes with 5/8" posts. Each tool rest is topped with a hardened steel bar which will not nick, dent and will stay smooth after years of use.More information #ad
Robust tool rest are made from solid steel. Tool rest for mini lathes - 12" Wide - 5/8" Post.Brand | Robust #ad |
Manufacturer | Robust #ad |
Height | 3 Inches |
Length | 6 Inches |
Weight | 3 Pounds |
Width | 12 Inches |
Part Number | RTR-12-MN-SD |
More information #ad
7. Robust
#ad
Standard Post, Robust Box Tool Rest
#adRobust #ad - Robust box rests are made from solid ½” thick laser cut steel and relieved on the edge for clearance. The rest is 1. 5” wide and overhangs 5”. Helpful when using a scraper or captive hollow rig to shape the inside of a turned box or other hollow form.More information #ad
Sold as tool rest only, lathe banjo not included. They are offset so that you can do the rim and the inside all in one set up. Box rest - 1" diameter - Standard Post.Brand | Robust #ad |
Manufacturer | Robust #ad |
Height | 4.75 Inches |
Length | 5 Inches |
Width | 1.5 Inches |
Part Number | RTR-BOXR-SD |
More information #ad
8. Robust
#ad
Robust 12" Interior Curved Tool Rest, Long Post
#adRobust #ad - Fits oneway 2436, 2416 | powermatic 3520c, 3520b, 3520a, 4224 | Robust AB25 | General 20" Lathes. Exterior interior rest - 12" Wide - 1" Diameter - Long Post.More information #ad
Each tool rest is topped with a hardened steel bar which will not nick, dent and will stay smooth after years of use. Sold as tool rest only, lathe banjo not included. Robust tool rest are made from solid steel.Brand | Robust #ad |
Manufacturer | Robust #ad |
Height | 3 Inches |
Length | 6 Inches |
Weight | 3 Pounds |
Width | 12 Inches |
Part Number | RTR-12-IC-LO |
More information #ad
9. PSI Woodworking
#ad
PSI Woodworking CLTEZSETA EZ-Glide Pen Turner's Tool rest Set 2Piece
#adPSI Woodworking #ad - Ultra smooth, round hardened steel rod top will let you effortlessly glide your Lathe tool for superior results. Post on both tool rests is 5/8" Diameter.More information #ad
Concave design allows your fingers to get closer to your work. See manufacturer's description below for tool rest measurements. Upper support rod will not nick or scratch.Brand | PSI Woodworking #ad |
Manufacturer | PSI Woodworking Products #ad |
Height | 6.2 Inches |
Length | 6.2 Inches |
Weight | 1.52 Pounds |
Width | 4.95 Inches |
Part Number | CLTEZSETA |
Model | CLTEZSETA |
Warranty | 2 Years |
More information #ad
10. Robust
#ad
Robust Comfort Tool Rest 12" Wide, Standard Post
#adRobust #ad - Comfort rest - 12" wide - 1" Diameter - Standard Post. Fits robust sweet 16, 2016 | nova dvr, liberty | oneway 2036, 3000 | delta 16 | general 16 |Stubby 750, independence, 1000 | Woodfast 16 Lathes.More information #ad
Each tool rest is topped with a hardened steel bar which will not nick, dent and will stay smooth after years of use. Robust tool rest are made from solid steel. Sold as tool rest only, lathe banjo not included.Brand | Robust #ad |
Manufacturer | Robust #ad |
Height | 3 Inches |
Length | 6 Inches |
Width | 12 Inches |
Part Number | RTR-012-CR-SD |
More information #ad