As an Amazon Associate I earn from qualifying purchases.

Quality: made with premium black abs plastic, this unit was designed for durability and is abrasion resistant - able to withstand daily wear & tear from dirt, sawdust and woodchips.



Made in the usa. Wire-reinforced, polyurethane hose provides superior flexibility and anti-static components significantly reduce the likelihood of static shocks. Patented bucket lid design maximizes the cyclone’s separation efficiency, and see-through feature lets you see how full the bucket is.
Collapse-proof buckets won't fold under high vacuum pressures. Stops dust from reaching your vacuum's filter/bag, eliminating filter clogging and suction loss. Compatible with any make/model shop vacuum; tapered ports fit standard 1. 5" to 2. 5" hose fittings. Neutral-vane technology improves separation efficiency by 20%.

Premium: made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection.



Two installation methods. Suitable for most medium duty workloads. Both ways are very strong. Etoolcity automatic vacuum switch has a starting threshold of approximately 025 amps30watts at 120v and 60watts at 220v, power sanders and Routers, perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, and extend the life of your vacuum.
Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems. If the tool motor connected to the 'a' port exceeds 30w, the vacuum connected to the 'B' port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time. Unique current sensing technology.

1. PSI Woodworking
#ad
PSI Woodworking DBGULP Big Gulp Dust Hood
#adPSI Woodworking #ad - Lightweight and portable; made from tough ABS plastic. 4-inch port to connect to any dust collection system. Perfect for miter saws, carving, lathes, sanding, radial arm saws, and planers without hoods. Weighs 2. 2 pounds. Dust hood with a 13-by-16-inch opening.More information #ad
Brand | PSI Woodworking #ad |
Manufacturer | PSI Woodworking #ad |
Height | 10 Inches |
Length | 13 Inches |
Width | 16 Inches |
Part Number | DBGULP |
Model | DBGULP |
Warranty | 2 year limited warranty |
More information #ad
2. POWERTEC
#ad
POWERTEC 70108 4 Inch Blast Gate for Dust Collector/Vacuum Fittings
#adPOWERTEC #ad - And 3-3/4” I. D. Includes: 4” blast gate; both ends have 4” od outlet diameters and are designed to work with 4” ID dust hoses or other 4” ID ports. Function: maximizes the efficiency of your dust collection system by directing and regulating the air flow from one machine to another.Quality: made with premium black abs plastic, this unit was designed for durability and is abrasion resistant - able to withstand daily wear & tear from dirt, sawdust and woodchips.
More information #ad
Compatibility: will not connect directly to other 4” od ports; please confirm that the actual listed size fits your application before ordering. If connecting to a 4” oD port, a Flex Cuff or similar device will be required. Specifications: accepts 4” id dust hose, port or vacuum fitting; 4" Nominal end measures 3-61/64” O. D.Brand | POWERTEC #ad |
Manufacturer | POWERTEC #ad |
Height | 3.5 Inches |
Length | 6.6 Inches |
Weight | 0.35 Pounds |
Width | 6.5 Inches |
Part Number | 70108 |
Model | 70108 |
More information #ad
3. POWERTEC
#ad
POWERTEC 70122 Big Gulp Dust Hood
#adPOWERTEC #ad - And 3-47/64-inch I. D. Outlet: 4-inch for hose or pipe. Tough, durable ABS plastic material. 4-inch nominal end measures 3-31/32-inch O. D. Opening measures: 13-Inch by 16-Inch. Easy solution for catching sawdust.More information #ad
Brand | POWERTEC #ad |
Manufacturer | Southern Technology LLC #ad |
Height | 10.5 Inches |
Length | 16 Inches |
Weight | 1.2 Pounds |
Width | 13 Inches |
Part Number | 70122 |
Model | 70122 |
More information #ad
4. WEN
#ad
WEN 3410 3-Speed Remote-Controlled Air Filtration System 300/350/400 CFM, Basic w/ RF Remote 400 CFM
#adWEN #ad - Dimensions – 17” l x 205” w x 10” h | electrical requirements – 120v, 60 hz, 1a | air flow – 300/350/400 cubic feet per minute | Cover rooms up to – 400 sq ft. Programmable timer automatically shuts unit off after set number of minutes.More information #ad
Rf remote system allows for operation from any angle of the room, even if direct line of vision is obstructed. Noise rating – 50 to 60 dB. Includes a 1-micron filter and a 5-micron pre-filter, both of which can be easily replaced. Remote control allows users to set timer, change speed and power the unit on and off from up to 26 feet away.Brand | WEN #ad |
Manufacturer | Great Lakes Tool MFG INC #ad |
Height | 10 Inches |
Length | 17 Inches |
Weight | 31 Pounds |
Width | 20.5 Inches |
Part Number | 3410 |
Model | 3410 |
Warranty | 2 year |
More information #ad
5. Oneida Air Systems
#ad
Oneida Molded Deluxe Dust Deputy Kit with Two Collapse-Proof Buckets
#adOneida Air Systems #ad - Us pat. 6833016, #7282074, #re40048, #d933321 and patent pending. Original, patented cyclone design removes over 99% of fine dusts and bulk debris from the airstream. Reinforced, quick-release, cyclone lid allows for quick and easy emptying.Made in the usa. Wire-reinforced, polyurethane hose provides superior flexibility and anti-static components significantly reduce the likelihood of static shocks. Patented bucket lid design maximizes the cyclone’s separation efficiency, and see-through feature lets you see how full the bucket is.
More information #ad
Portable design can be mounted directly to the vacuum. Works with most materials: wood dust, grass & leaves, blasting soda, pet/animal hair, concrete dust, metal shavings, drywall dust, water, clay/silica dust, baking flour, cooled ash & soot, pharmaceutical waste, and much more!. Collapse-proof buckets won't fold under high vacuum pressures. Stops dust from reaching your vacuum's filter/bag, eliminating filter clogging and suction loss. Compatible with any make/model shop vacuum; tapered ports fit standard 1. 5" to 2. 5" hose fittings. Neutral-vane technology improves separation efficiency by 20%.
Brand | Oneida Air Systems #ad |
Manufacturer | Oneida Air Systems #ad |
Height | 12.01 Inches |
Length | 12.01 Inches |
Weight | 0.36 Pounds |
Width | 29.21 Inches |
Part Number | AXD000004A |
Model | AXD000004A |
More information #ad
6. POWERTEC
#ad
POWERTEC 70136 4-Inch Hose to 2-1/2 Inch Hose Cone Reducer
#adPOWERTEC #ad - The 2-1/2 in. Opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners. Includes: 4” to 2 1/2” Dust Collection Hose Reducer. Dimensions: 4” nominal od end measures 3-61/64” od and 3-41/64” id; 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID.Premium: made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection.
More information #ad
Function: a handy double sided adapter that allows you to step down from your larger 4” dust collection hose to a smaller 2-1/2 shop vacuum hose branch line. Please note: this cone reducer is specifically designed to work exclusively with 4” and 2-1/2” hoses | It is NOT intended to fit or accommodate a 2-1/2” OD or 4” OD dust collection equipment port directly which would require POWERTEC 70149 or 70148 Flex Cuffs.Brand | POWERTEC #ad |
Manufacturer | Southern Technology LLC #ad |
Height | 4 Inches |
Length | 4 Inches |
Weight | 0.2 Pounds |
Width | 4 Inches |
Part Number | 70136 |
Model | 70136 |
More information #ad
7. Rousseau
#ad
Silver, Rousseau 5000 Dust Solution for Miter Saws
#adRousseau #ad - Hood folds into heavy duty Carry Bag For Compact Storage And Transport. Use with shop vass, dust Collectors Or Installed Vacuum Systems. Hood captures dust and Directs Airflow To 4" Vacuum Port. Interior baffles Prevent Escape Of Fine Dust.More information #ad
Hood folds into heavy duty Carry Bag For Compact Storage And Transport. Interior baffles Prevent Escape Of Fine Dust. Fits all Miter Saws. Use with shop vacs, dust Collectors Or Installed Vacuum Systems. Hood captures dust and Directs Airflow To 4" Vacuum Port. Fits all Miter Saws.Brand | Rousseau #ad |
Manufacturer | Rousseau #ad |
Height | 40 Inches |
Length | 50 Inches |
Width | 30 Inches |
Part Number | 5000 |
Model | 5000 |
Warranty | Limited Lifetime |
More information #ad
8. PSI Woodworking
#ad
PSI Woodworking LCHSS8 Wood Lathe 8pc HSS Chisel Set
#adPSI Woodworking #ad - Great for woodworkers woodturners and penturners of all skill levels. Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes. Includes wooden case for storage and carrying.More information #ad
Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles. Set includes 8 chisels 3/16" parting tool 5/8" spear scraper 1" skew chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge.Brand | PSI Woodworking #ad |
Manufacturer | PSI Woodworking #ad |
Height | 13.5 Inches |
Length | 18 Inches |
Width | 2 Inches |
Part Number | LCHSS8 |
Model | LCHSS8 |
Warranty | 2 Years Under Normal Use |
More information #ad
9. Etoolcity
#ad
Eliminating Circuit Breaker Tripping, Automatic Vacuum Switch for Power Tools, Etoolcity Unique Current Sensing Technology to Delay Vacuum On to Prevent Circuit Overload
#adEtoolcity #ad - The switch's shell has pc+abs V0 grade flame retardant material, it is more reliable and safe to protect work. Adopting high-cost, ul-certified american standard 14awg power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W.Two installation methods. Suitable for most medium duty workloads. Both ways are very strong. Etoolcity automatic vacuum switch has a starting threshold of approximately 025 amps30watts at 120v and 60watts at 220v, power sanders and Routers, perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, and extend the life of your vacuum.
More information #ad
Make the work more effective. More safety. You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems. If the tool motor connected to the 'a' port exceeds 30w, the vacuum connected to the 'B' port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time. Unique current sensing technology.
Brand | Etoolcity #ad |
Manufacturer | Etoolcity #ad |
Part Number | ec |
Model | LF40-HVC01 |
More information #ad
10. Fulton Woodworking Tools
#ad
MADE IN USA!, FULTON 4" x 50' Ultra Flex Clear-Vue Heavy Duty PVC Hose
#adFulton Woodworking Tools #ad - This heavy duty hose will not collapse under pressure from your dust collector. Hose is clear so you can see directly inside to spot any kind of obstruction.More information #ad
The pvc hose is wrapped around a steel wire that can easily be grounded. Tight bending radius allows you to maneuver the hose anywhere in your shop.Brand | Fulton Woodworking Tools #ad |
Manufacturer | Peachtree Woodworking Supply Inc #ad |
Height | 10 Inches |
Length | 24 Inches |
Width | 20 Inches |
Part Number | 377 |
Model | 377 |
More information #ad