Top 10 Prazi Beam Saw – Circular Saw Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Prazi USA

#ad

Prazi USA PR2700 Beam Cutter Non Worm Drive

#adPrazi USA #ad - Footplate must drop from rear. Vertical blade allows smooth, exact square cuts. Footplate and built in site ensures gliding manageability while cutting perfectly straight lines. One pass cuts for beams, Posts and logs creating errorless match-up. New design that fits most regular 7 1/4 inch circular saws. Easy installation. Will cut angles up to 45 degrees while at 90 Degree you get a 12" cut. Increase your cutting capacity from 2 1/2 inches to 12 inches.

Brand	Prazi USA #ad
Manufacturer	Prazi USA #ad
Height	30 Inches
Length	84 Inches
Weight	3.44 Pounds
Width	49 Inches
Part Number	PR2700
Model	PR2700
Warranty	Lifetime Limited Warranty

2. Prazi USA

#ad

Blades, Beam Cutter for 7-1/4 Inch Worm Drive Saws, Prazi USA

#adPrazi USA #ad - Will cut angles up to 45 degrees. Footplate and built in site ensures glide management; vertical blade allows smooth, exact, square cuts. Executes log cuts, bandsaw cuts, compound angles, and more. Prazi beam cutter works with Bosch and Skil 7 1/4 and 8 1/4 worm drive saws. All products guaranteed--defective products can be returned for warranty replacement.

Brand	Prazi USA #ad
Manufacturer	Prazi USA #ad
Height	0 Inches
Length	0 Inches
Weight	4.4 Pounds
Width	0 Inches
Part Number	PR-7000
Model	PR-7000

3. Prazi USA

#ad

Prazi USA PR-8000 18" Beam Cutter, Circular Saw Blade and Chain Attachment

#adPrazi USA #ad - Gives your circular the cutting power of a chain saw. Fits all skil, makita, bosch, dewalt, and Craftsman 7.25-inch and 8. 25-inch worm drive circular saws. Attaches easily in 60 seconds with included hardware; no need to remove any saw parts. Cut wooden beams and panels up to 18 inches thick with this beam cutter attachment for your circular saw. Designed to cut 18-inch sip, foam laminated panels, insulated panels, and soft wood not recommended for hard wood.

Brand	Prazi USA #ad
Manufacturer	Prazi USA #ad
Height	0 Inches
Length	0 Inches
Width	0 Inches
Part Number	PR-8000
Model	PR8000

4. Makita

#ad

Makita HS0600 10-1/4" Circular Saw

#adMakita #ad - Well balanced design at 16-1/2" long and weighing only 15. 2 pounds For increased operator comfort. Large cutting capacity 3-13/16" at 90° and 2-11/16" at 45°. Powerful 15 amp motor delivers 4, 300 RPM with power to cut beams, engineered lumber, and timber. Delivers the trusted performance of the Makita 5007F 7-1/4" circular saw with the capacity to cut 4x lumber in a single pass. Auxiliary front and top handles are positioned for comfort and control.

Brand	Makita #ad
Manufacturer	Makita #ad
Height	14.6 Inches
Length	12.6 Inches
Weight	15.2 Pounds
Width	18.7 Inches
Part Number	HS0600
Model	HS0600
Warranty	1-year limited warranty

5. Superior Steel

#ad

Superior Steel S77000 12 Inch Beam Cutter for Worm Drive Saws

#adSuperior Steel #ad - Footplate and built-in site ensures gliding manageability while cutting perfectly straight lines. Convert your 7-1/4" & 8-1/4" worm Drive to a Beam Cutter Saw not included. The beam cutter does what a chain saw or a circular saw cannot do. The vertical blade allows smooth, exact, square cuts. One-pass cut for beams, posts, and logs, creating errorless match-ups.

Brand	Superior Steel #ad
Manufacturer	Superior Steel #ad

6. SKILSAW

#ad

Skilsaw SPT70V-11 SUPER SAWSQUATCH 16-5/16-Inch Worm Drive Circular Saw Bundle with 32 Tooth ATB General Saw Blade 16-5/16-Inch 2 Items

#adSKILSAW #ad - Bundle includes: skilsaw spt70v-11 super sawsquatch 16-5/16-inch worm drive circular saw, and Freud Diablo D1632X 32 Tooth ATB General Purpose Saw Blade 16-5/16-Inch.

Foot plate: the magnesium, die-cast foot plate guarantees true, square cuts every time. Productivity: The electric brake allows for increased jobsite productivity. Construction: with lightweight, and the 15 AMP Dual-Field motor, brass worm drive gearing, durable magnesium construction, everything about this saw is built to be relentless. Perfect cuts: the included 16-5/16-inch SKILSAW blade makes perfect cuts right out of the box.

Brand	SKILSAW #ad
Manufacturer	Skilsaw #ad
Height	9.1 Inches
Length	9.1 Inches
Weight	1 Pounds
Width	9.1 Inches
Part Number	SPT70V-11D1632X

7. Makita

#ad

Makita 5402NA 16-5/16-Inch Circular Saw

#adMakita #ad - Powerful motor delivers 1, 800 max watts out. Sp6000j. Blade wrench 783204-6. Electric brake for maximum productivity. Low noise level at only 87dB for quiet operation.

Rip fence 164019-4. 5007mg. Low noise level at only 87dB for quiet operation. Sp6000j1. For ease of operation. 5007f. 5005ba. Large depth control lever for convenience and secure adjustments. Blade stabilizer for stable blade rotation and superior cutting performance. Weighs only 28. 7 pounds for ease of operation. 4100nhx1. 5007mga. Large support handle for increased operator comfort and control. 5477nb. 5008mga. Large capacity blade cuts 6-1/4-inches at 90 degrees and 4-3/16 inches at 45 degress. 4101rh. Electric brake for maximum productivity. 5104. Large capacity blade cuts 6-1/4"" at 90° and 4-3/16"" at 45°.

Brand	Makita #ad
Manufacturer	Makita #ad
Height	21.26 Inches
Length	30.88 Inches
Width	13.78 Inches
Part Number	5402NA
Model	5402NA
Warranty	1 Year

8. XtremepowerUS

#ad

XtremepowerUS 14" Cutter Circular Saw Concrete Wet/Dry Saw Electric Cutter w/Water Line Attachment Blade Included

#adXtremepowerUS #ad - The circular saw is lightweight and powerful machine with superior power-to-weight ratio with exceptionally low vibrations mean less strain and maximized productivity. The tool also comes standard with GFCI built-in the cord.

Used wet or dry, the dual integrated dust management system takes the dust out of the job; For wet cuts, build-in water feed attachment and control the flow with the convenient valve, water line feeds water to the blade decreasing dust and increasing blade performance and life. Strong motor that delivers the power to cut through granite, porcelain, concrete and other stone materials with ease.

Extraction dust port can vent the cutting debris timely, help you clear the cutting surface, for you to keep the cutting line free of dust all the time, and also give you a clear view of the cutting line. With the metal guard design to prevent the hurt from spark when operating. Strong motor that delivers the power to cut through granite, porcelain, concrete and other stone materials with ease.

Brand	XtremepowerUS #ad
Manufacturer	XtremepowerUS #ad
Height	15 Inches
Length	27.5 Inches
Weight	34 Pounds
Width	9.25 Inches
Part Number	50121

9. Cuz-D by Oliver

#ad

Cuz-D SFS-85 Circular Multipurpose Straight Flush Saw

#adCuz-D by Oliver #ad - All these features and much more with the familiar feel of a standard circular saw. This straight flush saw was designed for the people that earn a living with their tools.

Built to compete, out-perform and out-last. Built to compete, and a max cut depth of 3-1/8". Light weight magnesium alloy construction prevents user fatigue during all day use. 8 1/2 inch blades with 3-1/8” depth cut and 1-9/16” nose plunge cut capacity to cut larger lumber in a single pass. Bevel cutting capability from -5 to 65 degrees with flexible adjustable depth settings. Trigger actuated lower guard for safe operation. This revolutionary design allows flush cutting, under cutting, cutting into 90 degree corners, out-perform and out-last. The straight flush Saw was designed for the people that earn a living with their tools.

Brand	Cuz-D by Oliver #ad
Manufacturer	Cuz-D by Oliver #ad
Height	13 Inches
Length	20.5 Inches
Weight	14.3 Pounds
Width	5 Inches
Part Number	SFS-85
Model	SFS-85
Warranty	2 years Warranty

10. Big Foot Tools

#ad

10-1/4", Big Foot SK-1025KIT-2 Style 2 Beam Saw Attachment Kit

#adBig Foot Tools #ad - The big foot 10-1/4" skilsaw Adapter Kits comes with complete installation instructions. When cutting at a 45 degree angle with the big Foot 10-1/4" Worm Drive Beam Saw the depth of cut is 2-3/4". Fits skilsaw model shd77-02, spt77w, spt77w-22, does not fit spt77wml-22 mag LIGHT. When cutting at a 90 degree angle with the big Foot 10-1/4" Worm Drive Beam Saw the depth of cut is 3-7/8". Takes less than 15 minutes to install on to your 7-1/4" Skilsaw.

Brand	Big Foot Tools #ad
Manufacturer	Big Foot #ad
Height	4 Inches
Length	16.5 Inches
Weight	1 Pounds
Width	6 Inches
Part Number	SK-1025KIT-2
Model	SK-1025KIT-2
Warranty	1 Year Warranty