As an Amazon Associate I earn from qualifying purchases.
KREG #ad - Maxi-loc washer head for standard Kreg pocket holes. Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting.
KREG #ad - Case-hardened steel won’t bend, snap, or break. Coarse threads for softwoods, MDF, such as pine; and for plywood, particleboard. Maxi-loc washer head for standard Kreg pocket holes.
KREG #ad - Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting. Coarse threads for softwoods, MDF, such as pine; and for plywood, particleboard.
KREG #ad - Large diameter of steel shank creates durable screw. Hole screws prevent overdriving in pocket bottoms. Battery not included. Self-tapping auger tips do away with predrilling. 1-1/4" screw length for joining 3/4" stock.
KREG #ad - Sharp edge of self-tapping tip drills a cleaner pilot hole. Needle sharp point minimizes walking. Great for outdoor applications. Large maxi-loc head stops when it hits the bottom of the hole. Thicker fillet radius under the head reduces the possibility of the head twisting off.
Hilitchi #ad - Sharp cone point, it could help to drive into the wood board fast. Without burr, corrosion resistance and rust prevention. We would solve all the problems to your satisfaction. We have various #8 screws for your choice. We have 2 inch, 1 1/4 inch, 1 Inch and an assortment kit.
Quality after heat treatment modulation, 1 1/2 inch, our pocket screws have higher hardness. The overall finish is nice and neat. We include a square drive and with that, zinc bright surface, deep thread, uniform force, not slippery during operation.
Coarse thread and fine thread featuring wide thread, these self-tapping pocket screws could easily driving without bit slipping and wood splitting. Standard square groove&clear thread thread clear, sharper screw teeth and it is not easy to slip during operation. Sharp screw tips the sharp tips could reduce the resistance and cracking. They are very easy to screw into the wood board. You could either store one specific size or an assortment kit.
KREG #ad - Coarse threads for softwoods, MDF, such as pine; and for plywood, particleboard. Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting.
DAFUNY #ad - Dafuny #8 wood screws. Easy to use. Cutting-slot & coarse-Thread design for use with soft / plywoods. If these self-tapping tip screws don’t live up to your expectations, please let us know.
Square drive. Bonus pack that come with one square recess power bit S2 Tool Steel 1/4" Shank, 6" Length. You take no rISK when you purchase with us. But we’re betting you’ll fall in love with these 2-1/2 inches #8 wood screws, and a team of wild horses couldn’t get them out of your hands and make you send them back.
DAFUNY #ad - Dafuny #8 wood screws. Square drive. Bonus pack that come with one square recess power bit S2 Tool Steel 1/4" Shank, 6" Length. If these self-tapping tip screws don’t live up to your expectations, please let us know.
You’ll probably order MORE! Tough high carbon steel. But we’re betting you’ll fall in love with these 1-1/4inch square recess screws, and a team of wild horses couldn’t get them out of your hands and make you send them back.
1. KREG
#adKreg Zinc SML-C125-250 1-1/4" Coarse Thread Number 8 Coated Pocket Hole Screws 250 Count
#adMore information #ad
Flat-bottom head and smooth shank draw the pocket-hole joint together tightly. Coarse threads for softwoods, MDF, such as pine; and for plywood, particleboard. Case-hardened steel won’t bend, snap, or break.| Brand | KREG #ad |
| Manufacturer | Kreg Enterprises, Inc. #ad |
| Height | 1.9 Inches |
| Length | 6.4 Inches |
| Weight | 1.3 Pounds |
| Width | 4.1 Inches |
| Part Number | SML-C125-250 |
| Model | SML-C125-250 |
| Warranty | limited warranty, please call vendor for warranty issues |
More information #ad
2. KREG
#adKreg Zinc SML-C125-1200 1-1/4" Washer Head Number 8 Coated Pocket Hole Screws 1200 Count
#adMore information #ad
Flat-bottom head and smooth shank draw the pocket-hole joint together tightly. Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting.| Brand | KREG #ad |
| Manufacturer | Kreg Enterprises, Inc. #ad |
| Height | 3.6 Inches |
| Length | 9 Inches |
| Weight | 5.1 Pounds |
| Width | 6.1 Inches |
| Part Number | SML-C125-1200 |
| Model | SML-C125-1200 |
More information #ad
3. KREG
#adWasher-Head 5000 Count Silver, KREG, SML-C125, 5000 SML-C125-5000 Pocket Screws, 1-1/4" #8 Coarse-Thread
#adMore information #ad
Flat-bottom head and smooth shank draw the pocket-hole joint together tightly. Case-hardened steel won’t bend, snap, or break. Maxi-loc washer head for standard Kreg pocket holes.| Brand | KREG #ad |
| Manufacturer | Kreg #ad |
| Height | 5.5 Inches |
| Length | 9.5 Inches |
| Weight | 26.25 Pounds |
| Width | 9.25 Inches |
| Part Number | SML-C125 - 5000 |
| Model | SML-C125 - 5000 |
| Warranty | limited warranty, please call vendor for warranty issues |
More information #ad
4. KREG
#ad500, 1-1/4" COARSE Washer Head SELF Tapping Screw
#adMore information #ad
| Brand | KREG #ad |
| Manufacturer | Kreg #ad |
| Height | 5 Inches |
| Length | 3 Inches |
| Weight | 2.7 Pounds |
| Width | 4.25 Inches |
| Part Number | SML-C125-500 |
| Model | SML-C125-500 |
| Warranty | limited warranty, please call vendor for warranty issues |
More information #ad
5. KREG
#adKreg SML-C150-500 Pocket Hole Screws 1-1/2-Inch #8 Coarse Washer-Head 500ct, SML-C150, 500
#adKREG #ad - Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting. Maxi-loc washer head for standard Kreg pocket holes.More information #ad
Coarse threads for softwoods, such as pine; and for plywood, MDF, particleboard. Flat-bottom head and smooth shank draw the pocket-hole joint together tightly. Case-hardened steel won’t bend, snap, or break.| Brand | KREG #ad |
| Manufacturer | Kreg #ad |
| Height | 5 Inches |
| Length | 3 Inches |
| Weight | 3.03 Pounds |
| Width | 4.25 Inches |
| Part Number | SML-C150-500 |
| Model | SML-C150 - 500 |
| Warranty | limited warranty, please call vendor for warranty issues |
More information #ad
6. KREG
#ad1 1/4", 100 count, Washer Head, 8 Coarse, Kreg SML-C125S5-100 305 Stainless Steel Pocket Hole Screws
#adMore information #ad
| Brand | KREG #ad |
| Manufacturer | Kreg #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.56 Pounds |
| Width | 0 Inches |
| Part Number | SML-C125S5-100 |
| Model | SML-C125S5-100 |
| Warranty | As Labeled |
More information #ad
7. Hilitchi
#adHilitchi #8 Alloy Steel Zinc Pocket Hole Screws Weather Resistant Square Drive Screws with Square Drive 1 1/4 Inch Coarse Thread-280PCS
#adQuality after heat treatment modulation, 1 1/2 inch, our pocket screws have higher hardness. The overall finish is nice and neat. We include a square drive and with that, zinc bright surface, deep thread, uniform force, not slippery during operation.
More information #ad
Plus, high tensity, coarse thread pocket screws can be repeatedly disassembled and reused but the find thread screws can not be disassembled and reused. Quality after-sale service: if you do not satisfy with our products or if you have any questions, please come to us. Coarse thread and fine thread featuring wide thread, these self-tapping pocket screws could easily driving without bit slipping and wood splitting. Standard square groove&clear thread thread clear, sharper screw teeth and it is not easy to slip during operation. Sharp screw tips the sharp tips could reduce the resistance and cracking. They are very easy to screw into the wood board. You could either store one specific size or an assortment kit.
| Brand | Hilitchi #ad |
| Manufacturer | Hilitchi #ad |
| Part Number | H-XieKLS |
More information #ad
8. KREG
#adKREG SPS-C1-1200 Pocket Screws, Pan-Head 1200 Count, 1" #7 Coarse-Thread, zinc
#adMore information #ad
Flat-bottom head and smooth shank draw the pocket-hole joint together tightly. Pan-head screws for use with Kreg Micro-Pocket pocket holes. Case-hardened steel won’t bend, snap, or break.| Brand | KREG #ad |
| Manufacturer | Kreg Enterprises, Inc. #ad |
| Height | 3.6 Inches |
| Length | 9 Inches |
| Weight | 5 Pounds |
| Width | 6.1 Inches |
| Part Number | SPS-C1-1200 |
| Model | SPS-C1-1200 |
More information #ad
9. DAFUNY
#ad6" Length Square Recess Head Screwdriver/Power Bit 65 Count, 65 Pack 2-1/2" Coarse Thread #8 Wood Screws Blue Zinc Coated Pocket Hole Screw + 1 Piece S2 Steel 1/4" Shank
#adSquare drive. Bonus pack that come with one square recess power bit S2 Tool Steel 1/4" Shank, 6" Length. You take no rISK when you purchase with us. But we’re betting you’ll fall in love with these 2-1/2 inches #8 wood screws, and a team of wild horses couldn’t get them out of your hands and make you send them back.
More information #ad
What you receive: 65 pcs x 2-1/2 inch #8 pocket hole wood screws, 1pcs x Square Recess Head Screwdriver / Power Bit, our friendly customer service. These #8 wood screws are made of high carbon steel for durability and resistance to rust, corrosion. You’ll probably order MORE! Tough high carbon steel.| Brand | DAFUNY #ad |
| Manufacturer | DAFUNY #ad |
More information #ad
10. DAFUNY
#ad150 Pack 1-1/4" Coarse Thread Number 8 Zinc Coated Pocket Hole Screws + 1 Piece S2 Steel 1/4" Shank, 6" Length Square Recess Head Screwdriver/Power Bit 150 Count
#adYou’ll probably order MORE! Tough high carbon steel. But we’re betting you’ll fall in love with these 1-1/4inch square recess screws, and a team of wild horses couldn’t get them out of your hands and make you send them back.
More information #ad
These #8 wood screws are made of high carbon steel for durability and resistance to rust, corrosion. Easy to use. Cutting-slot & coarse-Thread design for use with soft / plywoods. What you receive: 150pcs x 1-1/4 inch #8 pocket hole wood screws, 1pcs x Square Recess Head Screwdriver / Power Bit, our friendly customer service. You take no risK when you purchase with us.| Brand | DAFUNY #ad |
| Manufacturer | DAFUNY #ad |
| Part Number | DF-WS001 |
More information #ad
