As an Amazon Associate I earn from qualifying purchases.
Fulton #ad - The. 200” thick, pull the spring loaded indexing pin outward, 60, adjustable, 45, 30, rotate the head to the desired position, solid aluminum head is machined with 13 positive stop holes. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time.
Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. The fence comes with a flip stop that makes repetitive cuts a breeze. Together these three items are the perfect compliment to each other for your table saw cutting needs. Also include are two sticky back measuring tapes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.
Fulton #ad - If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. The slots are approximately 1-1/8” from the base of the miter gauge head. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired.
Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot slight variances from brand to brand running the length on the bottom of the slot. You may also know that the miter gauge that came with your saw is not terribly accurate or durable.
If your saw does not have a “T” slot, adjustable plungers on the side of the bar. To adjust the head you simply loosen the post knob handle, rotate the head to the desired position, pull the spring loaded indexing pin outward, release the pin and lock into place by tightening the post knob handle. The steel miter bar is equipped with a metal, you can remove the disc. The head is mounted to a solid steel miter bar that measure 18” in length and is.
O'SKOOL #ad - The purpose of a miter gauge is to allow user to position and safely guide the workpiece. The miter gauge only fits dewalt dwe 7490x type 1, dwe 7491rs type 1, we 7499gd type 1, DWE 7491RS Type 2, dwe 7490x type 2, DWE 7499GD Type 2. Includes: 1 Miter Gauge Assembly.
VEVOR #ad - Additional trim blocks raises working efficiency. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting. The adjustable, 22. 5, 30, 45, solid aluminum head is machined with 11 positive stop holes.
Precise angle cutting: this table saw accessory is 004 inch / 1 mm high precision. Wide application: the table saw miter can improve the safety and accuracy of the table saw and the router table. The miter gauges are flat without burr, and hands-free.
Premium sturdy construction: this woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. Metric and imperial scale makes your work more convenient. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. Compatible standeded slot: our table saw sled is suitable for a standard 075 x 0
1. Generic
#adOEM N507559 Miter Gauge
#adGeneric #ad - Measures approximately 11. 53 x 5. 33 x 2. 23 inches. Compatible with: dwe7491rS, DWE7491RS. Replacement miter gauge, part number N507559. Genuine, oeM Replacement Part.More information #ad
| Brand | Generic #ad |
| Manufacturer | Dewalt #ad |
| Height | 2.23 Inches |
| Length | 11.53 Inches |
| Weight | 0.96 Pounds |
| Width | 5.33 Inches |
| Part Number | N507559 |
| Model | N507559 |
More information #ad
2. DEWALT
#adDeWalt 5140032-78 Replacement Table Saw Miter Gauge
#adDEWALT #ad - Measures approximately 11. 85 x 5. 20 x 2. 05 inches. Compatible with: dw745 type 1, dw745 type 2, dw745-b2 type 1, dw745-b2 type 3, dwe7480 type 1, dw745 type 20, DW745 Type 3, DWE7480 Type 20. Dewalt replacement gauge, part number 5140032-78. Genuine, oem Dewalt Replacement Part.More information #ad
| Brand | DEWALT #ad |
| Manufacturer | Dewalt #ad |
| Height | 2.05 Inches |
| Length | 11.85 Inches |
| Weight | 0.05 Pounds |
| Width | 5.2 Inches |
| Part Number | 514003278 |
More information #ad
3. Fulton
#adFulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
#adAlso included is a handy aluminum flip stop for repetitive angled cuts on your table saw. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
More information #ad
The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. Both ends of the fence are cut at exactly 45 degrees. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. The fence comes with a flip stop that makes repetitive cuts a breeze. Together these three items are the perfect compliment to each other for your table saw cutting needs. Also include are two sticky back measuring tapes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.
| Brand | Fulton #ad |
| Manufacturer | Fulton Woodworking Tools Inc. #ad |
| Part Number | 11567 |
| Model | 11567 |
More information #ad
4. Fulton
#adFulton Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc
#adStandard miter slots are 3/4” x 3/8” with a 1/8” “T” slot slight variances from brand to brand running the length on the bottom of the slot. You may also know that the miter gauge that came with your saw is not terribly accurate or durable.
More information #ad
The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit. The. 200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. The fulton miter gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs. If your saw does not have a “T” slot, adjustable plungers on the side of the bar. To adjust the head you simply loosen the post knob handle, rotate the head to the desired position, pull the spring loaded indexing pin outward, release the pin and lock into place by tightening the post knob handle. The steel miter bar is equipped with a metal, you can remove the disc. The head is mounted to a solid steel miter bar that measure 18” in length and is.
| Brand | Fulton #ad |
| Manufacturer | Fulton #ad |
| Part Number | 1250 |
More information #ad
5. O'SKOOL
#ad7491RS Type 1 and Type 2, 7499GD Type 1and Type 2, O'SKOOL Replacement Miter Gauge fits DeWalt table saws DWE 7490X Type 1 and Type 2
#adMore information #ad
There are lines for every one angle on miter gauge body, 60, 45, including larger lines at the five degree marks 30, 75 and 90 . This allows you to adjust the miter gauge to any angle you need. This replacement miter gauge is simple to install, which minimizes downtime. The miter bar swize is 22. 5mm x 9. 2mm x 300mmw x H x L.| Brand | O'SKOOL #ad |
| Manufacturer | O'skool #ad |
| Part Number | PTA11 |
More information #ad
6. KREG
#adKreg KMS7102 Table Saw Precision Miter Gauge System, Blue
#adKREG #ad - Guaranteed out of the box to. 003 accuracy of 6-inches. Vernier scale allows fast, 1/10th-degree angle adjustments. Factory calibration. Our extremely straight 24 inch 610mm anodized-aluminum bar is 3/8 inch9.More information #ad
5mm thick by 3/4 inch19mm wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver. Gauge head is cnc machine perfectly square to the bar and table no stampings.| Brand | KREG #ad |
| Manufacturer | Kreg Tool Inc #ad |
| Height | 6.25 Inches |
| Length | 25.25 Inches |
| Weight | 6 Pounds |
| Width | 2.63 Inches |
| Part Number | KMS7102 |
| Model | KMS7102 |
| Warranty | LIMITED |
More information #ad
7. DEWALT
#adOEM N272579 Replacement Table Saw Miter Gauge Assembly DWE7490
#adDEWALT #ad - Measures approximately 12. 25 x 5. 55 x 2. 30 inches. Dewalt replacement miter gauge assembly, part number N272579. Compatible with: dwe7490x type 1, dwe7491rs type 2, dwe7499gd type 1, dwe7491rs type 1, dwe7490x type 2, DWE7499GD Type 2. Genuine, oem Dewalt Replacement Part.More information #ad
| Brand | DEWALT #ad |
| Manufacturer | Dewalt #ad |
| Height | 2.3 Inches |
| Length | 12.25 Inches |
| Weight | 0.51 Pounds |
| Width | 5.55 Inches |
| Part Number | N272579 |
| Model | N272579 |
More information #ad
8. DEWALT
#adDEWALT OEM N435108 Miter Gauge Assy
#adDEWALT #ad - Dewalt replacement miter gauge assy, part number N435108. Compatible with: dcs7485t1, dwe7491rs, dcs7485b, dwe7499gd, dwe7499GD, dwe7491rs, DWE7485. Genuine, oem Dewalt Replacement Part. Measures approximately 12. 05 x 5. 25 x 2. 00 inches.More information #ad
| Brand | DEWALT #ad |
| Manufacturer | Dewalt #ad |
| Height | 2 Inches |
| Length | 12.05 Inches |
| Weight | 1.05 Pounds |
| Width | 5.25 Inches |
| Part Number | N435108 |
| Model | N435108 |
More information #ad
9. DEWALT
#adBlack & Decker Us Inc #14 Fax Dewalt N272579 Miter Gauge Genuine Original Equipment Manufacturer OEM part for Dewalt
#adDEWALT #ad - Compatible with: dwe7490x type 1, dwe7491rs type 1, dwe7490x type 2, dwe7499gd type 1, dwe7491RS Type 2, DWE7499GD Type 2. Genuine, oem Dewalt Replacement Part. Dewalt replacement miter gauge assembly, part number N272579.More information #ad
| Brand | DEWALT #ad |
| Manufacturer | Dewalt #ad |
| Height | 12 Inches |
| Length | 5 Inches |
| Weight | 0.51 Pounds |
| Width | 5 Inches |
| Part Number | N272579 |
More information #ad
10. VEVOR
#adVEVOR Precision Miter Gauge, Miter Saw Fence w/Laser Marking Scale, 18" Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop
#adPrecise angle cutting: this table saw accessory is 004 inch / 1 mm high precision. Wide application: the table saw miter can improve the safety and accuracy of the table saw and the router table. The miter gauges are flat without burr, and hands-free.
More information #ad
It also can be used for router tables and jointers. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 60 and 90 degrees. Miter gauge fence system is currently a must-have for every family. Premium sturdy construction: this woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. Metric and imperial scale makes your work more convenient. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. Compatible standeded slot: our table saw sled is suitable for a standard 075 x 0
| Brand | VEVOR #ad |
| Manufacturer | VEVOR #ad |
| Height | 4.7 Inches |
| Length | 22.4 Inches |
| Weight | 4 Pounds |
| Width | 5.1 Inches |
| Part Number | 18 inch Miter Gauge |
| Model | 18 inch Miter Saw Fence |
More information #ad
