As an Amazon Associate I earn from qualifying purchases.




Explosive, mucous or corrosive liquid is forbidden. 5. Forbidden fluid: dangerous liquid which contains solid particles, fibre or oil stains is not allowed.
2. Wide application:it is designed special for heating system and it can be used to supply water and add pressure for mansions of city, to supply water in cycle for cooling air-condition, to match with insdustrial equipment, house, supply hot water and keep warm in cycle, boiler and solar energy, villa of suburb, etc.

In addition, if your pipes pass through the floor, the floor will also become warm. High qualitysuper silent, anti-fraying, environmental friendly, aesthetics.
28 gpm. Specificationvoltage/frequency: 110-120v, 60hz. Advantageprevent pipes from freezing in winter, especially for cold winter areas. Rated power: 93/67/46 w. Max head: 6/4. 9/4 m 20/16/13 ft. Wide applicationsfor city buildings, suburban villas, boilers, air conditioning, water and pressurized with industrial equipment, houses, solar circulating water, hot water circulating warm and so on.

Bearing: Carbon axia. In addition, the floor will also become warm. Max head: 6/4. 9/4 m 20/16/13 ft;pump housing: Aluminum. Easy installation, waiting for 2-3 minutes in the past, saving you the cost of plumbers; Instant hot water, only need a wrench to connect the pump to the pipeline, now it takes only 15 seconds to get hot water.
Max pressure: 145 psi 10 bar, the circulation pump with three-speed control. Flow: 36/29/20 lpM 9. 5/7. 66/5. 28 gpm. Npt 3/4 inch 19. 05 mm inlet/outlet. Prevent pipes from freezing in winter, if your pipes pass through the floor, especially for cold winter areas. Rated power: 93/67/46 w.



1. Watts Premier
#ad
Watts Premier Instant Hot Water Recirculating Pump System with Built-In Timer 6" X 6"
#adWatts Premier #ad - 24-hour programmable timer activates pump when you need it. Voltage: 120 volts, item weight: 8. 5 pounds. Overall Dimension: 6. 2 x 6 x 5 inches. Provides hot water at every faucet or shower when needed and helps eliminate wasted water.More information #ad
Easily installs to existing plumbing and is maintenance-free. Kit includes a pump with timer with 10' cord, sensor valve, valve mounting screws, 2 adapters with rubber washers, and two 12-inch supply lines.Brand | Watts Premier #ad |
Manufacturer | Watts #ad |
Height | 8.3 Inches |
Length | 7.6 Inches |
Weight | 6.4 Pounds |
Width | 7.6 Inches |
Part Number | 0955800 |
Model | Instant |
Warranty | Watts (the "Company") warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge |
More information #ad
2. bayite
#ad
Bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
#adbayite #ad - Comes with a power adapter. Max flow Rate: 2. 1gpm, max discharge Head: 9. 8ft. One year warranty: replacement without return. Max circulating water temperature: 55°c/131°F. The od of the brass coupler is 10mm.More information #ad
Circulation pump is non-self-priming pump. 1/2" male thread on the pump. Power source: dc 12vpower adapter included, low noise: 30db at 1 metre, Rated current: 07a, brushless motor, Service life: 30000 hours. It's submersible but can't be immersed in hot water exceeding 50°C/122℉.Brand | bayite #ad |
Manufacturer | bayite #ad |
Weight | 0.66 Pounds |
Part Number | BYT-7A015 |
More information #ad
3. bayite
#ad
Bayite BYT-7A014 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
#adbayite #ad - Power source: dc 12vnot included, low noise: 30db at 1 metre, Brushless Motor, Rated current: 0.7a, service life: 30000 hours. No power adapter included. Circulation pump is non-self-priming pump. Plug type: 2.More information #ad
1mm x 5. 5mm female. Max circulating water temperature: 55°c/131°F. 1/2" male thread on the pump. Max flow Rate: 2. 1gpm, max discharge Head: 9. 8ft. One year warranty: replacement without return. The od of the brass coupler is 10mm. It's submersible but can't be immersed in hot water exceeding 50°C/122℉.Brand | bayite #ad |
Manufacturer | bayite #ad |
Height | 3.43 Inches |
Length | 3.94 Inches |
Weight | 0.66 Pounds |
Width | 1.57 Inches |
Part Number | BYT-7A014 |
Model | BYT-7A014 |
More information #ad
4. bayite
#ad
Bayite BYT-7A014A DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
#adbayite #ad - Max circulating water temperature: 55°c/131°F. One year warranty: replacement without return. Plug type: 2. 1mm x 5. 5mm female. 1/2" male thread on the pump. It's submersible but can't be immersed in hot water exceeding 50°C/122℉.More information #ad
Circulation pump is non-self-priming pump. The od of the brass coupler is 10mm. Max flow Rate: 2. 1gpm, max discharge Head: 9. 8ft. Power source: dc 12vcomes with a ac 110v to dc 12v power adapter, rated current: 07a, low noise: 30db at 1 metre, Brushless Motor, Service life: 30000 hours.Brand | bayite #ad |
Manufacturer | bayite #ad |
Weight | 0.66 Pounds |
Part Number | BYT-7A014A |
More information #ad
5. BOKYWOX
#ad
BOKYWOX Hot Water Circulation Pump NPT 3/4'' Hot Water Recirculating Pump 3-Speed Circulating Pump Stainless Steel 304 Circulation PumpRS15-6SB
#adBOKYWOX #ad - 3. Features: the pump is treated with special anti-rust treatment, beautiful appearance, no rust. 4. Material: the pump is equipped with a stainless steel pump head, PE impeller, aluminum motor shell, ceramic bearings. Fluid temperature range: 0-100℃0-212℉;Ambient Temperature: Permissible up to 40℃104℉.Explosive, mucous or corrosive liquid is forbidden. 5. Forbidden fluid: dangerous liquid which contains solid particles, fibre or oil stains is not allowed.
More information #ad
1. Specific: voltage: 110v/60hz; power: 93/67/46w; max flow: 36/29/20 l/min9. 5/7. 66/5. 28gpm; max head: 20/16/13ft 6/5/4m;inlet/outlet: NPT 3/4’’. No leakage, corrosion resistance, high temperature resistance, long life, low noise, environmental protection, anti-fraying, convenient installation, run responsible and so on.22. Wide application:it is designed special for heating system and it can be used to supply water and add pressure for mansions of city, to supply water in cycle for cooling air-condition, to match with insdustrial equipment, house, supply hot water and keep warm in cycle, boiler and solar energy, villa of suburb, etc.
Brand | BOKYWOX #ad |
Manufacturer | BOKYWOX #ad |
Part Number | PW-8TCO-N1YE |
More information #ad
6. Tysun
#ad
Tysun Hot Water Recirculating Pump for Water Heater System Hot Water Circulation Pump 3/4" NPT 110V 3-Speed
#adTysun #ad - Easy installationjust need a wrench to connect the pump to the pipeline, waiting for 2-3 minutes in the past, saving you the cost of plumbers; Instant hot water, now it takes only 15 seconds to get hot water the kitchen takes about 1 minute to get hot water due to low flow restriction.In addition, if your pipes pass through the floor, the floor will also become warm. High qualitysuper silent, anti-fraying, environmental friendly, aesthetics.
More information #ad
The hot water circulation pump features high efficiency with low consumption. High temperature resistance, high flow and leak-tightness. Flow: 36/29/20 lpM 9. 5/7. 66/5. 28 gpm. Specificationvoltage/frequency: 110-120v, 60hz. Advantageprevent pipes from freezing in winter, especially for cold winter areas. Rated power: 93/67/46 w. Max head: 6/4. 9/4 m 20/16/13 ft. Wide applicationsfor city buildings, suburban villas, boilers, air conditioning, water and pressurized with industrial equipment, houses, solar circulating water, hot water circulating warm and so on.
Brand | Tysun #ad |
Manufacturer | Shanghai Taisu Trading Co.,Itd #ad |
More information #ad
7. KolerFlo
#ad
KOLERFLO Water Recirculating Pump 3/4 Inch Circulating Water Pump for Water Heater System RS15-6 SS Green
#adKolerFlo #ad - Super silent, saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, environmental friendly, such as desert areas. Impeller: Corrosion-resistant, PES.Bearing: Carbon axia. In addition, the floor will also become warm. Max head: 6/4. 9/4 m 20/16/13 ft;pump housing: Aluminum. Easy installation, waiting for 2-3 minutes in the past, saving you the cost of plumbers; Instant hot water, only need a wrench to connect the pump to the pipeline, now it takes only 15 seconds to get hot water.
More information #ad
High temperature resistance, anti-fraying, high flow and leak-tightness. Max pressure: 145 psi 10 bar, the circulation pump with three-speed control. Flow: 36/29/20 lpM 9. 5/7. 66/5. 28 gpm. Npt 3/4 inch 19. 05 mm inlet/outlet. Prevent pipes from freezing in winter, if your pipes pass through the floor, especially for cold winter areas. Rated power: 93/67/46 w.
Brand | KolerFlo #ad |
Manufacturer | KOLERFLO #ad |
Height | 7.1 Inches |
Length | 8.9 Inches |
Width | 6.8 Inches |
More information #ad
8. Grundfos
#ad
Grundfos GRU-595916 595916
#adGrundfos #ad - Connection: 3/4-inch m by 3/4-inch fnPT. Maintenance-free, easy to install, low energy consumption, quiet running. Supply voltage:115-120 vaC, Contact Rating: 16 amps. The grundfos circulator pumps, series up, are specifically designed for heating systems.More information #ad
Tlc = timer, line Cord, 6-Foot. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. Motors: single phase, 60 hertz, 115v. Flow range: 0 - 9 u. S. Gpm, head range: 0 - 6-Foot.Brand | Grundfos #ad |
Manufacturer | Grundfos #ad |
Height | 10 Inches |
Length | 10 Inches |
Width | 10 Inches |
Part Number | GRU-595916 |
Model | GRU-595916 |
Warranty | 2 years from the date of installation |
More information #ad
9. bayite
#ad
Bayite BYT-7A006 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
#adbayite #ad - Power source: dc 12vnot included, rated current: 07a, low noise: 30db at 1 metre, brushless Motor, Service life: 30000 hours. Circulation pump is non-self-priming pump. One year warranty: replacement without return.More information #ad
1/2" male thread on the pump. Max circulating water temperature: 55°c/131°F. The od of the brass coupler is 10mm. Max flow Rate: 2. 1gpm, max discharge Head: 9. 8ft. No power adapter included. It's submersible but can't be immersed in hot water exceeding 50°C/122℉.Brand | bayite #ad |
Manufacturer | bayite #ad |
Part Number | BYT-7A006 |
More information #ad
10. BACOENG
#ad
Hot Water Circulation Pump for Water Heater System, BACOENG 115V Flanged 3-Speed Recirculating Pump
#adBACOENG #ad - 2 pole, single phase, 115 volt motor, switchable at 93/67/46 watts, low electricity usage. Flanges interfaces are easy for your maintenance and replacementFlange set not included.More information #ad
Multi-applications on residential and commercial hydronic radiant heating and plumbing. Hot or cold water circulation, 15 GPM, up to 20 feet head, 3-speed switchable. Cast iron body with 3 feet power cord plug.Brand | BACOENG #ad |
Manufacturer | BACO ENGINEERING #ad |
Part Number | P0795 |
More information #ad