As an Amazon Associate I earn from qualifying purchases.






Wide application a great set of pliers add any home maintenance or on-the-job toolbox, use for water pipe, replacement water tap, car repair, industrial using, heating repair and so on. Built to last3 piece water pump pliers made of hardened carbon steel, provides exceptional strength and longevity for frequent use, specially coated for ultimate rust prevention.
Opening capacity: 1 inch 25mm for 8-inch model, allow to be slide bigger and smaller with ease,torque for flat, round, 1.8 inch 47mm for 10-inch model, square, 2 inch 53mm for 12-inch model, hexagonal, or irregularly shaped objects and clamping materials. Adjustable opening sizethe pliers are easily adjusted the size you need.



1. Channellock
#ad
Blue, Channellock 430 Tongue & Groove Pliers | 10" Straight Jaw Groove Joint Plier with Comfort Grips | 2" Jaw Capacity | Laser Heat-Treated 90° Teeth| Forged From High Carbon Steel | Made In USA,Black, Silver,10-Inch
#adChannellock #ad - Right angle, laser heat-treated teeth grip better and last longer. Permalock fastener eliminates nut and bolt failure. Channellock uses high-carbon steel for superior performance on the job and specially coated for ultimate rust prevention.More information #ad
Channellock Blue grips for comfort. Made in the USA. Patented reinforcing edge minimizes stress breakage. Undercut tongue & groove design won't slip.Brand | Channellock #ad |
Manufacturer | Channellock #ad |
Height | 0.75 Inches |
Length | 12.5 Inches |
Weight | 0.94 Pounds |
Width | 3.88 Inches |
Part Number | 430-BULK |
Model | 430 |
Warranty | All CHANNELLOCK pliers, wrenches, and drivers are warranted for material and/or workmanship. Tools are not warranted against abuse or wear from faithful service. |
More information #ad
2. KNIPEX
#ad
Alligator Water Pump Pliers, Multi-Component 8802250, 10 inches, KNIPEX Tools
#adKNIPEX #ad - More output and comfort compared to conventional water pump pliers of the same length: offer 9 adjustment positioning for 30% more gripping capacity. Box-joint design: high stability because of double guide.More information #ad
Good access to the workpiece due to slim size in the head and joint area. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. With comfort grip handles. 61 hrc: low wear and reliable gripping. Gripping surfaces with special hardened teeth, teeth hardness approx.Brand | KNIPEX #ad |
Manufacturer | Knipex Tools #ad |
Height | 0.8 Inches |
Length | 10.3 Inches |
Weight | 0.66 Pounds |
Width | 2.2 Inches |
Part Number | 88 02 250 |
Model | 8802250 |
More information #ad
3. Channellock
#ad
10 In, Polished, Channellock 432 Tongue and Groove Pliers
#adChannellock #ad - High-carbon c1080 steel for superior performance on the job and specially coated for ultimate rust prevention. Patented reinforcing edge minimizes stress breakage.More information #ad
Permalock fastener eliminates nut and bolt failure. Undercut tongue & groove design won't slip. Right angle, laser heat-treated teeth grip better and last longer. Made in the USA.Brand | Channellock #ad |
Manufacturer | Channellock #ad |
Height | 0.75 Inches |
Length | 12.5 Inches |
Weight | 0.95 Pounds |
Width | 3.88 Inches |
Part Number | 432 |
Model | 432 |
Warranty | Limited Lifetime Warranty |
More information #ad
4. Channellock
#ad
Channellock 415 10-Inch Smooth Jaw Tongue
#adChannellock #ad - Made in the USA. Undercut tongue & groove design won't slip. Channel lock Blue grips for comfort. Permalock fastener eliminates nut and bolt failure. Smooth jaw for use on plated fixtures and surfaces chrome, nickel. Patented reinforcing edge minimizes stress breakage.More information #ad
Brand | Channellock #ad |
Manufacturer | Channellock #ad |
Height | 4.8 Inches |
Length | 0.55 Inches |
Weight | 0.93 Pounds |
Width | 11.57 Inches |
Part Number | CHL417 |
Model | 415 |
Warranty | Lifetime warranty. All Channellock tools are 100% guaranteed against breakage and failure. |
More information #ad
5. Klein Tools
#ad
Yellow/Black, Klein Tools J502-10 Journeyman,Pump Pliers,10"
#adKlein Tools #ad - Smoothly adjusts between six machined tongue and groove jaw positions. Wide range of versatile jaw positions. Quick-adjust rivet allows one-handed fast, easy adjustment of plier jaws.More information #ad
Tension-loaded joint to reduce handle wobble for sure gripping. Secure tongue and groove design for non-slip grip - even with heavy pressure.Brand | Klein Tools #ad |
Manufacturer | Klein #ad |
Height | 10 Inches |
Length | 10 Inches |
Weight | 1 Pounds |
Width | 10 Inches |
Part Number | J502-10 |
Model | J502-10 |
Warranty | LIFETIME |
More information #ad
6. Klein Tools
#ad
D502-10 D50210 10-Inch Pump Pliers, Small, Yellow, Klein Tools
#adKlein Tools #ad - Robust teeth for sure gripping action. Quick-adjust rivet allows one-handed fast, easy adjustment of plier jaws. Smoothly adjusts between six machined tongue and groove jaw positions.More information #ad
1-3/4-inch 44 mm maximum parallel jaw opening for a range of applications. Secure tongue and groove design for non-slip grip -- even with heavy pressure.Brand | Klein Tools #ad |
Manufacturer | Klein #ad |
Height | 0.88 Inches |
Length | 10 Inches |
Weight | 0.97 Pounds |
Width | 4.63 Inches |
Part Number | D502-10 |
Model | D502-10 |
Warranty | 1 year manufacturer |
More information #ad
7. FengWu
#ad
8inch Water Pump Pliers Set with Non Slip Handle, 10inch, 3PCS Tongue and Groove Pliers Set Channel Locks Pliers Set, 12inch, Quick Adjust Plumbing Pliers Straight Jaw
#adFengWu #ad - Even if you put too much pressure on it. You can grip any pipes, nuts, grip down tight even to round smooth objects. Ergonomic anti-slip handle the grip are comfortable to hold and control, not easy to slip.Wide application a great set of pliers add any home maintenance or on-the-job toolbox, use for water pipe, replacement water tap, car repair, industrial using, heating repair and so on. Built to last3 piece water pump pliers made of hardened carbon steel, provides exceptional strength and longevity for frequent use, specially coated for ultimate rust prevention.
More information #ad
Grip tighttongue-and-groove design for positive non-slip grip, The Teeth have held up well, or bolts, grip any type of surface. Opening capacity: 1 inch 25mm for 8-inch model, allow to be slide bigger and smaller with ease,torque for flat, round, 1.8 inch 47mm for 10-inch model, square, 2 inch 53mm for 12-inch model, hexagonal, or irregularly shaped objects and clamping materials. Adjustable opening sizethe pliers are easily adjusted the size you need.
Brand | FengWu #ad |
Manufacturer | FengWu #ad |
Part Number | FWUS-LocksPliers-3pcs--200807 |
More information #ad
8. Douglas
#ad
Douglas Pliers P-813P 10 inch Tongue & Groove "Pump Pliers" Angle Nose Slip Lock Joint Plier
#adDouglas #ad - Drop forged & heat Treated for Strength and Durability. Seven positions Grip tight Clip. 10 inch angle Nose Slip Joint Plier. Pipe wrench Style Teeth Zinc Plated. Made in the USA.More information #ad
Brand | Douglas #ad |
Manufacturer | Global TTC HA Standard #ad |
Height | 0.5 Inches |
Length | 10 Inches |
Weight | 6.62 Pounds |
Width | 2.5 Inches |
Part Number | P-813P |
Model | P813P |
More information #ad
9. IRWIN
#ad
Irwin Industrial Tools 2078510 10-Inch Groove Joint Pliers
#adIRWIN #ad - Irwin vise-grip pliers feature a durable nickel-chromium steel construction. Groove-joint pliers have 3 jaw positions. Protouch grips provide extra comfort and help reduce hand fatigue while using the IRWIN pliers.More information #ad
Right-angle teeth grip in all directions for maximum bite. Meets or exceeds ANSI specifications.Brand | IRWIN #ad |
Manufacturer | IRWIN #ad |
Height | 0.93 Inches |
Length | 12.87 Inches |
Weight | 0.82 Pounds |
Width | 4.17 Inches |
Part Number | 2078510 |
Model | 2078510 |
Warranty | Customer Satisfaction |
More information #ad
10. IRWIN
#ad
IRWIN VISE-GRIP Locking Pliers, 10-Inch 2078110, V-Jaw
#adIRWIN #ad - Press-n-slide button adjusts lower jaw 2X faster than traditional groove joint pliers. Durable constructed using a Metal Injection Molding MIM process for exceptional strength and performance.More information #ad
Anti-pinch, non-slip ProTouch grips increase control and reduce hand fatigue. Multi-groove ratcheting system has 2X more positions than other groove joint pliers for a precise grip on almost any surface.Brand | IRWIN #ad |
Manufacturer | IRWIN #ad |
Height | 2 Inches |
Length | 15 Inches |
Weight | 0.92 Pounds |
Width | 4 Inches |
Part Number | 2078110 |
Model | 2078110 |
Warranty | Customer Satisfaction |
More information #ad