As an Amazon Associate I earn from qualifying purchases.
Pre-drilling tool: the 18a automatic center punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping.
Adjustable force: for a heavy mark, the cap is screwed down. No hammer needed: this punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work.







Compact steel tip: center punches are important when it comes to marking an accurate drilling location.
Whether you need a window hole puncher, or a metal hole punch, an awl for leather belts, this efficient tool gets the job done right. Easy use & grip: with a nonslip surface and a precision-centered tip, this center metal punch has increased force control for accurate holes every time. Each center tool is spring loaded with an adjustable stroke and cap that accommodates any project.

Carry pouch included: this center pouch set comes with a convenient, red plastic, storage pouch case for keeping your center punches organized.

1. Starrett
#ad
Starrett 18A Automatic Center Punch with Hardened Steel Metal, No. 4 Graduation, Universal Tool for Machinists and Carpenters with Adjustable Knurled Cap to Control Blow Force
#adStarrett #ad - Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting. Steel construction: this center punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow.Pre-drilling tool: the 18a automatic center punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping.
More information #ad
Removable point: the point can be easily removed for regrinding and/or replacement Always wear safety goggles when using striking tools. Adjustable force: for a heavy mark, the cap is screwed down. No hammer needed: this punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work.
Brand | Starrett #ad |
Manufacturer | STAKF #ad |
Height | 5.5 Inches |
Length | 1 Inches |
Weight | 0.2 Pounds |
Width | 1.1 Inches |
Part Number | 18A |
Model | 18A |
Warranty | One Year on defects in material and workmanship |
More information #ad
2. Starrett
#ad
Starrett 117C Center Punch With Round Shank, 4" Length, 1/8" Tapered Point Diameter
#adStarrett #ad - Hardened and tempered steel provides wear resistance and strength. Country of Origin: United States. Round shank is knurled for grip. Item package dimension: 4. 0" l x 1. 0" w x 1. 0" h.More information #ad
Brand | Starrett #ad |
Manufacturer | Starrett #ad |
Height | 0.98 Inches |
Length | 4.29 Inches |
Weight | 0 Pounds |
Width | 1.5 Inches |
Part Number | 117C |
Model | 117C |
Warranty | Manufacturer |
More information #ad
3. HHIP
#ad
1/2", HHIP 8600-0041 28 Piece Transfer Punch Set, 3/32"
#adHHIP #ad - Black oxide finish. Undersize. 3/32-1/2" by 64ths and 11/32". 4-7/8" long. Heat treated tempered tool steel for longer life. 0025".More information #ad
Brand | HHIP #ad |
Manufacturer | HHIP #ad |
Height | 4 Inches |
Length | 8 Inches |
Weight | 1 Pounds |
Width | 4 Inches |
Part Number | 8600-0041 |
Model | 8600-0041 |
More information #ad
4. Mayhew Tools
#ad
Mayhew Select 74004 5/8-Inch Center Punch
#adMayhew Tools #ad - Over all length oal: 6-1/4-inch, body type: hex, body size: 5/8-Inch, point size: 3/8-Inch 0.375-inch. Used for piercing, or marking for starting drills in metal and other materials; If you want to scribe lines in metal, consider a prick punch. Made in the USA. Shot-blasted finish.More information #ad
Brand | Mayhew Tools #ad |
Manufacturer | Mayhew #ad |
Height | 1.5 Inches |
Length | 6.25 Inches |
Weight | 0.2 Pounds |
Width | 2.5 Inches |
Part Number | 74004 |
Model | 74004 |
Warranty | Two Year Warranty |
More information #ad
5. Edward Tools
#ad
Edward Tools Center Punch Staking Tool for Steel and Metals — Heavy Drop Forged Steel with Durable hex shank, 6” X 1/2” X 1/4”
#adEdward Tools #ad - Durable hex shank. Heavy duty drop forged steel. Lifetime Warranty. Staking tool for auto, nail punch,. 6” x 1/2” x 1/4”.More information #ad
Brand | Edward Tools #ad |
Manufacturer | Edward Tools #ad |
More information #ad
6. General Tools
#ad
General Tools SPC74 Round Shank Center Punches, Set of 5
#adGeneral Tools #ad - Packed in a vinyl case. Stamped with size for quick identification. Knurled body. Points are ground to size for maximum strength and penetration.More information #ad
Brand | General Tools #ad |
Manufacturer | General Tools #ad |
Height | 5.88 Inches |
Length | 0.63 Inches |
Weight | 0.39 Pounds |
Width | 4.5 Inches |
Part Number | SPC74 |
Model | SPC74 |
More information #ad
7. Mayhew
#ad
3-Piece, Mayhew Select 89082 Punch Set, Black
#adMayhew #ad - Includes: 24008 7/16-inch center Punch 1/4-Inch Pt. 2-year Limited. 74001 5/16-inch reg ec Center Punch. 43502 7/32-inch by 5-inch Prick Punch.More information #ad
Brand | Mayhew #ad |
Manufacturer | Mayhew #ad |
Height | 2 Inches |
Length | 12 Inches |
Width | 4 Inches |
Part Number | 89082 |
Model | 39082HT |
More information #ad
8. Neiko
#ad
NEIKO 02638A 5-Inch Automatic Center Hole Punch | Adjustable Impact Spring Loaded Puncher Tool
#adNeiko #ad - The reinforced s2 steel tip holds up to hard materials and makes surfaces ready for any nail or drill. Heavy duty with impact: this chrome-plated shank body withstands intense impact force, and the metal resists corrosion and damage over time. Center hole-punch tool: our 5-inch automatic center punch tool is a great tool for working with materials like wood, metal, plastic, glass, and leather.Compact steel tip: center punches are important when it comes to marking an accurate drilling location.
More information #ad
Activate this tool with a firm downward push to achieve the exact size hole you need. All-in-one center punch: this spring-loaded glass breaker and center punch tool is suitable for all kinds of tasks. With the spring-driven action and hard steel awl tip, our hand-held puncher lets you mark drill holes anywhere while on the job. Whether you need a window hole puncher, or a metal hole punch, an awl for leather belts, this efficient tool gets the job done right. Easy use & grip: with a nonslip surface and a precision-centered tip, this center metal punch has increased force control for accurate holes every time. Each center tool is spring loaded with an adjustable stroke and cap that accommodates any project.
Brand | Neiko #ad |
Manufacturer | Ridgerock Tools Inc. #ad |
Height | 1.2 Inches |
Length | 7.7 Inches |
Weight | 0.15 Pounds |
Width | 2.8 Inches |
Part Number | 02638A |
Model | 02638A |
More information #ad
9. Starrett
#ad
Storage Pouch, Set of 5, 1/16", 3/32", 5/32" Diameters, 1/8", Carpenters with Knurled Finger Grip, 5/64", Centering Tool for Machinists, Hardened Tempered Steel Metal, Starrett S117PC Center Punch Set
#adStarrett #ad - Steel construction: these center punches are made of hardened steel; Its tempered head makes it less likely to fracture from a hard, off-center blow. Knurled grips: round shank is knurled for a sturdy grip and greater control; As an added precaution, always wear safety goggles when using striking tools.Carry pouch included: this center pouch set comes with a convenient, red plastic, storage pouch case for keeping your center punches organized.
More information #ad
Set of 5 - includes a combo of our individual models, 117b with 3/32" d tapered point & 4" l, 117d w/ 5/32" d tapered point & 4" l, 117a 5/64" d tapered point & 4" L, including 117aa with 1/16" d tapered point & 3" L, 117C with 1/8" D tapered point & 4" L. Pre-drilling tool: center punches are tools used for making an indentation in an object; This allows you to safely drill a hole at the same spot without slipping.Brand | Starrett #ad |
Manufacturer | STAKF #ad |
Height | 8.2 Inches |
Length | 1 Inches |
Weight | 0.4 Pounds |
Width | 3.1 Inches |
Part Number | S117PC |
Model | S117PC |
Warranty | One Year on defects in material and workmanship |
More information #ad
10. Fowler
#ad
Fowler Full Warranty 52-500-015-0 Black Nitrate Center Punch 5 Piece Set
#adFowler #ad - Chrome alloy steel; hardened both ends. Point sizes 3⁄64", 5⁄64", 7⁄64", 9⁄64" and 11⁄64". Knurled finger grip for easy handling. Includes fitted case. 1 year warranty offered by Fowler High Precision, an American company.More information #ad
Brand | Fowler #ad |
Manufacturer | Fred V. Fowler Company, Inc. #ad |
Part Number | 52-500-015-0 |
Model | 52-500-015-0 |
More information #ad