Top 10 Center Finder Punch – Measuring & Layout

As an Amazon Associate I earn from qualifying purchases.

1. Jackson Safety

#ad

Use to measure Pipes 0.5" and Up, Jackson Safety Pipe Marker Centering Tool, Adjustable Dial Set Level, Curv O Standard #6, Standard 4" Y-Type Head, 14775

#ad
Jackson Safety #ad - Safety standards – when it comes to providing innovative safety solutions, and comfort on the job, long-lasting value, welding tools with unparalleled features, Jackson Safety has set the standard for the best protective gear and tools in the industry.

Standard size – this curv-o standard #6 model level tool may be used on pipes and tanks that measure one-half of inch in diameter or larger. Y-head – the center finder has a 4 inch Y-type head fitted with an adjustable dial bubble protractor DSL. Best operation – use this manual jackson safety hardened centering pin angle finder with a small hammer or mallet to tap the pin in for the most effective pipe marking.

Pipe measurer – this easy-to-use marking tool is designed for pipe fitters and welders as an economical measuring tool for setting center lines, locating points inside pipes and tanks, laying out keyways, establishing angles and marks for butt-ins, and measuring declivity.
BrandJackson Safety #ad
ManufacturerSureWerx #ad
Height1.7 Inches
Length6.7 Inches
Weight0.95 Pounds
Width4.8 Inches
Part NumberJ3001879
Model14775
WarrantyManufacturer

2. SST

#ad

SST Pipe Center Punch

#ad
SST #ad - Two precision bubble Levels Ensure Multi-Planar Alignment. Masterfully machined from 6061 aluminum with a Beautiful Anodized Finish - Backed by 5 Year SST Warranty. Magnetic center punch accurately Marks Pipes 0 - 10" in Diameter. Laser etched angle Markings Provide High Resolution Angle Selection. Twin neodynium magnets Powerfully Fix the Unit to Workpiece.
BrandSST #ad
ManufacturerSST Co #ad
Part NumberSST011

3. Mrs Bad

#ad

Mrs Bad Center Scriber Woodworking Center Marking Finder Tool Carpenters Center Drilling Tool

#ad
Mrs Bad #ad - Install tables, drawers, door handles, making drilling reference line, pin connection, design crafts. It is sturdy and durable, not easy to wear, and has fine molds and precise scales. Multi-function place a woodworking pen in the positioning hole in the middle of the tool, which can easily mark the center of the board, and the sliding tool can clearly draw the center line of the board; placing a drill in the positioning hole can directly punch a hole in the center of the board for easy installation of screws Woodworking accessories.

Quality assurance if you have any questions, contact us, we will reply within 24 hours.

Wide application suitable for steel plate grooving, assembly work, marking mortise and tenon. Materialthe drill locator is made of abs engineering plastics and metal. Size can be adjusted you can adjust the width of the two ends of the locator according to your needs to adapt to different sizes of wood, which can save money and time. It is a very practical woodworking tool.
BrandMrs Bad #ad
ManufacturerMrs Bad #ad
Height2.36 Inches
Length6.3 Inches
Weight0.72 Pounds
Width4.72 Inches
Part Number210130MQ01-3-7152-1344282451
Model210130MQ01-3-7152-1344282451

4. Factory

#ad

Factory Bell Punch Center Finder for Round Bar for Machinist and Engineer & DIY Use

#ad
Factory #ad - It will center punch of a round bar upto 35 mm Diameter. Effective design to find Center of a Round Bar Very easily Very accurately. A very handy tool to Drill Any Round Piece where to center is required. The punch is hardened to hardness of 55+/*2 HRC.
BrandFactory #ad
ManufacturerFACTORY #ad

5. Flange Wizard

#ad

53025-M Flange Wizard Small Centering Head

#ad
Flange Wizard #ad - For pipes 1-1/2” to 10” in diameter. Designed for the person who works with smaller diameter pipe. Fire protection contractors, fence and gate builders, live stock pens and corrals, and various alignment jobs in the automotive field are a few of the many uses.
BrandFlange Wizard #ad
ManufacturerFlange Wizard #ad
Height1 Inches
Length5.75 Inches
Weight0.2 Pounds
Width4 Inches
Part NumberB002BW7WEM
Model53025M

6. Flange Wizard

#ad

48" Pipe Capacity, Standard, Flange Wizard 53076-M Centering Head Tools, 8"

#ad
Flange Wizard #ad - Designed to establish and mark a centerline at any angle around the circumference inside or outside on a Pipe or tank. Item package Weight: 1. 0 lb. Model number: 496-53076-M. Use it as a protractor level, or remove and use the hardened center Punch for other marking jobs.
BrandFlange Wizard #ad
ManufacturerFlange Wizard #ad
Height1 Inches
Length1 Inches
Weight0.5 Pounds
Width1 Inches
Part Number53076-M
Model496-53076-M
WarrantyManufacturer

7. Flange Wizard

#ad

Magnetic Centering Head, Small

#ad
Flange Wizard #ad - One piece y-shaped body design with magnetic legs. Used to establish and mark a centerline at any angle around circumference on a pipe or tank or as a protractor level. Product sku: 496-53025-M. Hardened center punch marks set position by taping with a hammer. Built-in dial with 2-1/2 increments that turns 360 .
BrandFlange Wizard #ad
ManufacturerFlange Wizard #ad
Height10 Inches
Length3 Inches
Width5 Inches
Part Number53025M
Model496-53025-m

8. Toledo Pipe Tools

#ad

Toledo Pipe Tools Toledo Pipe Magentic Center Pipe Hole Punch easily drill holes in 1 inch to 10 inch Pipe Hole Saw

#ad
Toledo Pipe Tools #ad - Saves time and accuracy laying out crosses or multiple outlets on the same length pipe. Using a center punch prevents the drill bit from walking on the curved surface. Pipe capacity: 1" to 10", Machined from aircraft grade 6061 aluminum. Replaceable leveling vials are protected by the housing and visible from 2 sides. Rare earth magnets maintain a strong contact on pipe.
BrandToledo Pipe Tools #ad
ManufacturerToledo Pipe Tools #ad
Weight1 Pounds
Part NumberTP-CPP

9. AnNafi

#ad

AnNafi® Engineer's Bell Punch Hand DIY Center Finding Tool to Find Centre of Round Bar-Quickly,Easy & Accurate Engineering Machine Workshop Tools

#ad
AnNafi #ad - It will center punch of a round bar upto 35 mm diameter. Your premium quality round workpiece center finder by annafi:- this item is made of high quality used for finding center of a round bar quickly, easily and precisely.

The punch is made of eN31 alloy steel - hard & ground for long life performance. Dimensions:- a very handy precise tool for finding center of a round bar of upto 35 mm diameter, without any significant efforts. Round bar center finder uses:- the punch is hardened to hardness of 55+/*2 hrc. Engineer machine worksop tools:- old british design very effective to find center of a round bar very easily and accurately.

Satisfaction guaranteed:- we provide 30 Day Full Money Back Guarantee against any Manufacturing Defect. Its helpful when you want to drill any round piece and needs to find it center. Its quite simple to use just put it on the round bar and punch it to find the center. So buy With Confidence.
BrandAnNafi #ad
ManufacturerAnNafi #ad
Part NumberAAA-156

10. Jackson Safety

#ad

To measure Pipes 1" and Up, 14776, Curv-O Jumbo #7, Jackson Safety Pipe Marker Centering Head Tool, Adjustable Dial Set Level, Standard 8" Y-Type Head

#ad
Jackson Safety #ad - Safety standards – when it comes to providing innovative safety solutions, long-lasting value, unparalleled features, and comfort on the job, Jackson Safety has set the standard for the best protective gear and tools in the industry.

Y head – the center finder has a 8" Y type head fitted with adjustable dial bubble protractor DSL. Pipe measurer – designed for pipe fitters and welders as an measurer for setting center lines, locating points inside pipes and tanks, establishing angles and marks for butt-ins, laying out keyways, and measuring declivity. Best operation – use this jackson safety hardened centering pin angle finder with a small hammer or mallet to tap the pin in for the most effective pipe marking. Jumbo size – curv-o jumbo #7 model digital angle finder tool used on pipes and tanks that measure 1" in diameter and larger.
BrandJackson Safety #ad
ManufacturerSureWerx #ad
Height3 Inches
Length6 Inches
Weight1.25 Pounds
Width4 Inches
Part Number14776
Model14776
WarrantyManufacturer