As an Amazon Associate I earn from qualifying purchases.
DFM Tool Works #ad - Made in the usa with super Hard High Speed Steel Rockwell 63-65. Super hard steel easily Burnishes or Turns a Hook on Cabinet and Card Scrapers. Beautiful hard maple Handle is Stained Cherry Red and Made to Last.
Taytools #ad - Burnishers are tools with hard, polished rods that form or “draw out” the steel from the edge that is used to form the thin hook or cutting edge. This high carbon steel burnisher has a hardness of HRC 62-64.
This unhandled burnishing rod is very cost effective as no handle is included. A well-tuned cabinet scraper can remove glue, refining a finish, tame tearout, or put a glass-smooth finish on wood.
Fulton #ad - The curved convex and concave curves, gooseneck and beveled scrapers are ideal for working oddly shaped pieces like chairs, spindles, boxes and more. We highly recommend burnishing each scraper out of the box for optimum performance. The 6 included scrapers are made from a strong carbon steel and come in various shapes for a wide variety of applications.
Once your scrapers have the desired burr on each edge, you’ll be able to produce wonderful looking results on your wooden surfaces. Scrapers are perfect making your surfaces extra smooth and ready for light sanding for the finishing process.
They are used to create a burr or an edge on card scrapers so that the scrapers can produce clean, smooth wood surfaces by scraping the wood. This burnisher is simple in design and is made specifically to create burrs on the edges of flat, curved or beveled card scrapers. Most woodworkers love to use scrapers simply because they produce a wonderful looking end result that are beyond compare to most any other device. Also included is a handy booklet on “How to Sharpen a Card Scraper Using A Burnisher” to get you started right out of the box.
Peachtree Woodworking Supply #ad - Using card scrapers has long been used by wood craftsman for years and is now becoming more common among beginners and mid level woodworkers. Once your scrapers have the desired burr on each edge, you’ll be able to produce wonderful looking results on your wooden surfaces. Scraper burnishers are a staple in most every woodworkers shop.
The rod is made from hardened steel to withstand burnishing process. It can be used for standard burnishing applications and for working small, tight ends and spaces. The idea is to roll the edges of your scraper to create a burr so that it produces fine, you simply tilt the burnisher slightly to one side of the scraper and run the burnisher along the edge repeatedly until you produce the burr you are looking for.
Most woodworkers love to use scrapers simply because they produce a wonderful looking end result that are beyond compare to most any other device. Scrapers are perfect making your surfaces extra smooth and ready for light sanding for the finishing process. This burnisher is simple in design and is made specifically to create burrs on the edges of flat, curved or beveled card scrapers. The steel rod diameter measures approximately 3/8” which makes it perfect for working the edges of your scrapers without any give.
Narex #ad - Polished high carbon steel rod 3/8" diameter and 6" long hardened to Rockewll 62-64. Burnisher has a stained Hornbeam handle, brass ferrule and highly polished hardened high carbon steel rod.
Taytools #ad - The handle on this burnisher is made from solid american white ash and is patterned after an antique Holtzapffel Ornamental lathe turning tool. Creating a proper cabinet scraper edge referred to as a hook or burr is an essential skill to master that is best performed using a dedicated burnisher.
The handle fits the hand nicely while providing a firm grip and affording excellent control. The handle is 5-1/8 inches long, 1-1/4 inches diameter at the largest part and fitted with a solid brass ferrule. They measure 2-1/2 inch by 5 inch and are 0032-inch-thick, which is perfect for standard stock removal.
The 2-piece rectangular scraper set is the standard shape for working flat surfaces. The hardened and polished high carbon steel rod is 3/8 inch diameter, 4 inches long and hardened to HRC 62-64. A woodworker’s cabinet scraper is a simple, tame tear out, refine a finish, old-world tool that has numerous uses in the modern woodshop. A well-tuned cabinet scraper can remove glue, or put a glass-smooth finish on the most difficult to work wood.
Taytools #ad - A well-tuned cabinet scraper can remove glue, refine a finish, or put a glass-smooth finish on the most difficult to work wood. This 3-piece shaped scraper set contains the 3 standard profiles needed to finish irregular profiles or moldings: gooseneck, convex/concave and rectangular.
The handle fits the hand nicely while providing a firm grip and affording excellent control. Creating a proper cabinet scraper edge referred to as a hook or burr is an essential skill to master that is best performed using a dedicated burnisher.
All scrapers are 0032” thick. A woodworker’s cabinet scraper is a simple, tame tear out, old-world tool that has numerous uses in the modern woodshop. Set comes with complete sharpening instructions. The handle on this burnisher is made from solid american black walnut and is patterned after an antique Holtzapffel Ornamental lathe turning tool. The handle is 5-1/8 inches long, 1-1/4 inches diameter at the largest part and fitted with a solid brass ferrule.
1. DFM Tool Works
#adDFM Tool Works Cabinet Scraper Burnisher Tool – MADE IN USA – with Hard Maple Handle and Super Hard High Speed Steel Rod
#adMore information #ad
| Brand | DFM Tool Works #ad |
| Manufacturer | DFM Tool Works #ad |
More information #ad
2. Taytools
#adTaytools 773673 Cabinet Scraper Burnisher Unhandled High Carbon Steel HRC 62-64 3/8 Diameter x 5 Inches Long
#adThis unhandled burnishing rod is very cost effective as no handle is included. A well-tuned cabinet scraper can remove glue, refining a finish, tame tearout, or put a glass-smooth finish on wood.
More information #ad
Each rod comes with a vinyl tip. Creating a proper cabinet scraper edge referred to as a hook or burr is an important skill to learn and requires a dedicated burnisher. A wood handle can easily be added later. Size is 3/8 diameter by 5 inches long. A cabinet scraper is a simple, old-world tool that has many uses in the modern woodshop.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Part Number | 773673 |
| Model | 773673 |
More information #ad
3. Fulton
#adFulton Scraper Burnisher with 6 Piece Multi-Shaped Scraper Set 3 Rectangle 1 Beveled 1 Curved Convex and Concave and 1 Gooseneck Scraper
#adOnce your scrapers have the desired burr on each edge, you’ll be able to produce wonderful looking results on your wooden surfaces. Scrapers are perfect making your surfaces extra smooth and ready for light sanding for the finishing process.
More information #ad
To do this, it is relatively simple to use. Scraper burnishers are a staple in most every woodworkers shop. The hardened, polished high carbon hrc 62-64 steel rod measures approximately 3/8 inch in diameter which makes it perfect for working the edges of your scrapers without any give. They are used to create a burr or an edge on card scrapers so that the scrapers can produce clean, smooth wood surfaces by scraping the wood. This burnisher is simple in design and is made specifically to create burrs on the edges of flat, curved or beveled card scrapers. Most woodworkers love to use scrapers simply because they produce a wonderful looking end result that are beyond compare to most any other device. Also included is a handy booklet on “How to Sharpen a Card Scraper Using A Burnisher” to get you started right out of the box.
| Brand | Fulton #ad |
| Manufacturer | Fulton Woodworking Tools and Accessories #ad |
| Part Number | 11573 |
| Model | 11573 |
More information #ad
4. Peachtree Woodworking Supply
#adScraper Burnisher for Creating Sharp Burrs and Honing Card Scrapers 6 inch Steel Rod with Hardwood Handle
#adThe rod is made from hardened steel to withstand burnishing process. It can be used for standard burnishing applications and for working small, tight ends and spaces. The idea is to roll the edges of your scraper to create a burr so that it produces fine, you simply tilt the burnisher slightly to one side of the scraper and run the burnisher along the edge repeatedly until you produce the burr you are looking for.
More information #ad
If you have never used a burnisher, light shavings and makes the wood surface very smooth. The burnisher measures approximately 11-1/2 inches in total length and has a hardwood handle with a steel ferrule. Most woodworkers love to use scrapers simply because they produce a wonderful looking end result that are beyond compare to most any other device. Scrapers are perfect making your surfaces extra smooth and ready for light sanding for the finishing process. This burnisher is simple in design and is made specifically to create burrs on the edges of flat, curved or beveled card scrapers. The steel rod diameter measures approximately 3/8” which makes it perfect for working the edges of your scrapers without any give.
| Brand | Peachtree Woodworking Supply #ad |
| Manufacturer | Peachtree Woodworking Supply Inc. #ad |
| Part Number | PW1261 |
| Model | 1261 |
More information #ad
5. Timberline
#adTimberline Scraper Burnisher
#adTimberline #ad - There's no tool like this ingenious hardwood/steel burnisher for keeping your scrapers sharp. A properly burnished scraper blade makes guitar bodies, bindings and fingerboards ultra-smooth.More information #ad
The best tool to keep your scraper's edge. It quickly gives your blade micro-planed edges, and it sharpens a variety of scraper sizes, it's easy to use, shapes and thicknesses. Instructions included.| Brand | Timberline #ad |
| Manufacturer | Timberline #ad |
| Part Number | AN3416-B |
| Model | #AN3416-B |
More information #ad
6. Narex
#adNarex Cabinet Scraper Burnisher with Stained Hornbeam Handle 872401
#adMore information #ad
Made in czech Repubic by Narex Tools. Stained hornbeam handle 6 inches long by 1 1/2 inches in diameter. This burnisher is the perfect tool for putting the small hook on cabinet scrapers.| Brand | Narex #ad |
| Manufacturer | Narex #ad |
| Part Number | 872401 |
| Model | 872401 |
More information #ad
7. Taytools
#adTaytools Cabinet Scraper Burnisher with 3/8 Inch Diameter by 4-Inch-Long Hardened Steel Rod Hardened to HRC 62-64 with 2 Piece Rectangle Cabinet Scraper Set White Ash Handle
#adThe handle fits the hand nicely while providing a firm grip and affording excellent control. The handle is 5-1/8 inches long, 1-1/4 inches diameter at the largest part and fitted with a solid brass ferrule. They measure 2-1/2 inch by 5 inch and are 0032-inch-thick, which is perfect for standard stock removal.
More information #ad
Set comes with complete sharpening instructions. Burnishers are tools with hardened, polished rods that form or “draw out” the steel from the scraper edge that is used to form the thin hook or cutting edge. The 2-piece rectangular scraper set is the standard shape for working flat surfaces. The hardened and polished high carbon steel rod is 3/8 inch diameter, 4 inches long and hardened to HRC 62-64. A woodworker’s cabinet scraper is a simple, tame tear out, refine a finish, old-world tool that has numerous uses in the modern woodshop. A well-tuned cabinet scraper can remove glue, or put a glass-smooth finish on the most difficult to work wood.
| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Part Number | 776155 |
More information #ad
8. Crown Hand Tools
#adCrown Hand Tools Super Hard Cryogenicly Treated Cabinet Scraper Burnisher with Stained Beech Handle Handle 377C
#ad Crown Hand Tools #ad - This burnisher is the perfect tool for putting a hook on cabinet scrapers. Blade is cryogenically treated to produce a super hard scraping surface. Made in uk by Crown Hand tools. Polished 3/8" diameter blade is 6" long. Stained beech handle.More information #ad
| Brand | Crown Hand Tools #ad |
| Manufacturer | Crown Hand Tools #ad |
| Part Number | 377C |
| Model | 377C |
More information #ad
9. Snap-on
#adSnapOn 474-125-0.60 Bahco 5-Inch Cabinet Scraper
#adSnap-on #ad - Specifically for carpentry work. Blade of cold rolled, hardened and tempered chrome nickel steel. Cabinet scraper. Overall length of 5-Inch. White plastic edge protector.More information #ad
| Brand | Snap-on #ad |
| Manufacturer | SnapOn #ad |
| Height | 0.01 Inches |
| Length | 4.92 Inches |
| Weight | 0.13 Pounds |
| Width | 0.02 Inches |
| Part Number | 474-125-0.60 |
| Model | 474-125-0.60 |
More information #ad
10. Taytools
#adTaytools Cabinet Scraper Burnisher with 3/8 Inch Diameter by 4-Inch Hardened Steel Rod Hardened to HRC 62-64 with 3 Piece Cabinet Scraper Set Black Walnut Handle
#adThe handle fits the hand nicely while providing a firm grip and affording excellent control. Creating a proper cabinet scraper edge referred to as a hook or burr is an essential skill to master that is best performed using a dedicated burnisher.
More information #ad
The hardened and polished high carbon steel rod is 3/8 inch diameter, 4 inches long and hardened to HRC 62-64. Burnishers are tools with hardened, polished rods that form or “draw out” the steel from the scraper edge that is used to form the thin hook or cutting edge. All scrapers are 0032” thick. A woodworker’s cabinet scraper is a simple, tame tear out, old-world tool that has numerous uses in the modern woodshop. Set comes with complete sharpening instructions. The handle on this burnisher is made from solid american black walnut and is patterned after an antique Holtzapffel Ornamental lathe turning tool. The handle is 5-1/8 inches long, 1-1/4 inches diameter at the largest part and fitted with a solid brass ferrule.
| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Part Number | 776186 |
More information #ad
