Top 10 Bearing Puller Tool – Puller Sets

Uncategorized
As an Amazon Associate I earn from qualifying purchases.

1. OEMTOOLS

 #ad

Fits 5/8” x 18” or 3/4” x 16” Threaded Rods, Pilot Bearing and Bushing Removal, OEMTOOLS 27059 Pilot Bearing Puller Attachment

#ad
OEMTOOLS #ad - Easy to use: the slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, attach a slide hammer, turn the attachment housing expanding both jaws against the pilot bearing, and use the slide hammer to remove the bearing.

Variety of uses: not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators; This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods. Dimensions: this pilot bearing remover is easy to store anywhere at just 104" x 3. 4" x 1. 3". The blind bearing puller is also easy to wield, weighing in at just 13.

6 ounces, making it a great pilot tool. Save money: getting a pilot bearing replaced in an auto shop could cost you up to $650; You can save hundreds of dollars by using this one pilot puller. Durable: made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs; This blind hole bearing puller is built to last.
BrandOEMTOOLS #ad
ManufacturerGreat Neck Saw #ad
Height1.3 Inches
Length10.4 Inches
Weight0.85 Pounds
Width3.4 Inches
Part Number27059
Model27059
WarrantyManufacturer Warranty

2. GearWrench

 #ad

GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set, 41710

#ad
GearWrench #ad - Lifetime warranty. Rear-axle bearing puller set for use with most domestic cars. Removes semi-floating rear axles. Packaged in durable, blow-molded case with easy-to-use instructions. Includes 3 pullers for greater versatility.
BrandGearWrench #ad
ManufacturerKD Tools #ad
Height2.5 Inches
Length12 Inches
Weight4 Pounds
Width6 Inches
Part Number41710
Model41710

3. ChgImposs

 #ad

ChgImposs 2 Inch Two Claw Puller Separate Lifting Device Pull Strengthen Bearing Auto Mechanic Hand Tools for Bearing Maintenance

#ad
ChgImposs #ad - Made of carbon steel material for strength and longevity, it is durable. Pull size: 2 inch; open maximum width: 35mm / 1. 38"; open maximum Depth: 45mm / 1. 77". Can be used for automotive flywheel, car wheel, bicycle wheel, motorcycle wheel, machine wheel, etc. Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress. Removal tool kit for slide gears, pulley, and flywheel makes removal simple and damage-free.
BrandChgImposs #ad
ManufacturerFLXDirect #ad

4. OriGlam

 #ad

Happy Shopping DayOriGlam Adjustable Two Jaw Bearing Gear Puller Remover Tool, 2 Inch Carbon Steel Pump Removing Kit for Motorcycle

#ad
OriGlam #ad - Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps. Made of overall chromium vanadium steel, it is durable. Long use life. Adjust screw design and convenient to repaired different size gears and bearing. Fit for automotive flywheel, bicycle wheel, motorcycle wheel, car wheel, machine wheel and so on. Special heat treatment processing.
BrandOriGlam #ad
ManufacturerOriGlam #ad
Height0.79 Inches
Length5.91 Inches
Width3.94 Inches
Part NumberAMT_002_1
ModelAMT_002_1

5. Pro-Grade

 #ad

Pro-Grade 18212 4-Inch Adjustable 3 Jaw Gear Puller

#ad
Pro-Grade #ad - 3-ton capacity. Package length:9. 25". Made from hardened carbon steel for maximum strength. Lifetime Warranty. Package height:3. 5". 2 or 3 reversible jaws for inside or outside pulling needs. Country of Origin:China. Package width:6. 5". Fine thread center bolt for controlled pull.
BrandPro-Grade #ad
ManufacturerAllied International #ad
Height3.5 Inches
Length9.3 Inches
Weight1.2 Pounds
Width6.6 Inches
Part Number18212
Model18212
WarrantyLifetime

6. OEMTOOLS

 #ad

Gear Puller 2 or 3 Jaw, OEMTOOLS 27011 2/3 Jaw 2-Ton Puller, Pully Puller Set, Gear Puller Set, 2 Jaw Puller, Gear Puller 2 Jaw, 3 Jaw Puller Set

#ad
OEMTOOLS #ad - Made to endure: the small gear puller tool is constructed from heat-treated alloy steel to provide much needed strength. Reach and spread: the pulley remover for your pully puller kit features a 3.

5 inch maximum reach and maximum spread of 4. 75 inch; allows for maneuverability in tighter spaces. Heavy pulling: the pulley puller can be used to safely and effectively removed pressed-on gears, pulleys, bearing flanges, and flywheels from shafts and housings; No need for power tools or impact wrenches. More versatility: the gear puller tool can switch between 2 or 3 adjustable jaws depending on the type of component that needs removing; Easy to switch out number of jaws on the OEM pulley puller. Quicker repairs: the bearing puller increase productivity and cut down on number of tools; Three jaw puller is designed to make effective repairs in less time.
BrandOEMTOOLS #ad
ManufacturerGreat Neck Saw #ad
Height3.7 Inches
Length6.6 Inches
Weight1.4 Pounds
Width4.8 Inches
Part Number27011
Model27011
WarrantyOEMTOOLS Limited Lifetime

7. WINMAX TOOLS AUTOMOTIVE

 #ad

WINMAX TOOLS AUTOMOTIVE 16pc Blind Hole Pilot Bearing Puller Internal & Extractor Remove w/Slide Hammer

#ad
WINMAX TOOLS AUTOMOTIVE #ad - Collets are made from chrome molybdenum steel, and rust-proof finish of tool set for long-lasting using. This is goplus bearing puller set, which has high hardness and toughness.
BrandWINMAX TOOLS AUTOMOTIVE #ad
ManufacturerWinmax #ad
Part NumberGeneric
Model4333093963

8. OEMTOOLS

 #ad

OEMTOOLS 27037 3.75/4.5 Axle Puller

#ad
OEMTOOLS #ad - Yoke and bolt are Threaded 5/8 Inch x 18. Fits most domestic and Import Vehicles. Heat teated Pressure Screw for Toughness.
BrandOEMTOOLS #ad
ManufacturerGreat Neck Saw #ad
Height3.7 Inches
Length6.6 Inches
Weight2.95 Pounds
Width4.8 Inches
Part Number27037
Model27037
WarrantyOEM Limited Lifetime

9. OTC

 #ad

OTC 4581 Slide Hammer and Blind Hole Bearing Puller Set

#ad
OTC #ad - Blow-molded plastic storage case keeps set contents organized and protected from loss. The otc blind hole bearing puller set is for those jobs requiring an internal pull. Includes a 2-1/2 pound slide hammer with a T-handle. Select the appropriate sized collet by comparing it with the application. Set includes four collets sizes 7/16 inch to 1/2 inch, 5/8 inch to 1 inch, 9/16 inch to 11/16 inch, and 1 inch to 1-1/4 inch which fit a wide range of applications. Insert the collet, expand it to fit the hole, and then attach the slide hammer.
BrandOTC #ad
ManufacturerOTC Tools #ad
Height2.9 Inches
Length17 Inches
Weight8.3 Pounds
Width10 Inches
Part Number4581
Model4581

10. Performance Tool

 #ad

Performance Tool W80653 Pulley Puller

#ad
Performance Tool #ad - Adjustable jaw tension. Pulls pressed on 1 and 2 grove pulleys on alternators and power steering pumps. Also removes some alternator bearings. Heavy duty construction.
BrandPerformance Tool #ad
ManufacturerW80653 #ad
Height0 Inches
Length0 Inches
Weight2.1 Pounds
Width0 Inches
Part NumberW80653
ModelW80653