1. RIKON Power Tools
#ad
Rikon 13-920 Miter Gauge Compatible with Rikon 10-305 10-inch Bandsaw
#adRIKON Power Tools #ad - Made from sturdy aluminum design with easy to read adjustments. For fine detail work - when using a table saw, band saw, or stationary disk sander make sure you use this miter gauge to ensure you see the fine detail you need to see.More information #ad
This product is great for cross cutting. Includes - this miter gauge made for a 10-inch bandsaw includes a T-square slot bar. Compatible with - this miter gauge is made to be used with Rikon 10-305 and 10-306. Rikon miter gauge - this rikon miter gauge is perfect for holding your workpieces while cutting.Brand | RIKON Power Tools #ad |
Manufacturer | Rikon #ad |
Height | 2.6 Inches |
Length | 12.3 Inches |
Weight | 0.11 Pounds |
Width | 4.6 Inches |
Part Number | 13-920 |
Model | 13-920 |
More information #ad
2. POWERTEC
#ad
POWERTEC 71005 Deluxe Table Saw Miter Gauge
#adPOWERTEC #ad - Features: positive stops at all common angles for exceptional accuracy, a large ergonomical grip for control and comfort, set screws to remove any play, and a tip resistant washer to keep the unit steady when extended over your work surface.Function: provides you with a premium table saw miter gauge replacement that allows you to make crosscuts at any angle with high precision. Includes: 1 table Saw Miter Gauge.
More information #ad
Compatibility: fits and accommodates most standard 3/4 x 3/8 inch miter slots, with or without t-slotted miter slots, including DeWalt, Delta, Craftsman, Jet, Bosch and other brands of table saw and router table slots. Premium build: made with a combination of a high quality aluminum head and solid steel miter bar, this woodworking gauge was built for professional use and long-term durability.Brand | POWERTEC #ad |
Manufacturer | POWERTEC #ad |
Height | 3 Inches |
Length | 20 Inches |
Weight | 3.3 Pounds |
Width | 8 Inches |
Part Number | 71005 |
Model | 71005 |
More information #ad
3. Fulton
#ad
Fulton Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc
#adFulton #ad - The head is mounted to a solid steel miter bar that measure 18” in length and is. 353” thick by. 730” wide. If your saw does not have a “T” slot, adjustable plungers on the side of the bar. To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle.The. 200” thick, 30, 45, solid aluminum head is machined with 13 positive stop holes.
More information #ad
The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. 1 hole is at 90 degrees while the 6 holes on both sides are at 22. 5, adjustable, 60, 67.5 and 90 degrees. The slots are approximately 1-1/8” from the base of the miter gauge head. The steel miter bar is also equipped with spring loaded, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. The steel miter bar is equipped with a metal, you can remove the disc.
Brand | Fulton #ad |
Manufacturer | Fulton #ad |
Part Number | 1250 |
More information #ad
4. INCRA
#ad
Incra MITERV27 Miter V27 Miter Gauge
#adINCRA #ad - Miter gauge featuring 27 angle stops for precise incremental control. No-nonsense design and compact size. Universal mounting Bracket supports any user-made fence. Four expansion points adjust for zero side play. Delivers extreme miter cutting accuracy.More information #ad
Brand | INCRA #ad |
Manufacturer | Incra #ad |
Height | 3.5 Inches |
Length | 17 Inches |
Weight | 2.71 Pounds |
Width | 6.88 Inches |
Part Number | MITERV27 |
Model | MITERV27 |
Warranty | 1 year replacement warranty |
More information #ad
5. PORTER-CABLE
#ad
Porter Cable 514007535 Miter Gauge Assembly
#adPORTER-CABLE #ad - Part number 514007535. Fits various Porter Cable models. This is an o. E. M. Oem part number 514007535. This is a Porter Cable replacement part. Authorized part.More information #ad
Brand | PORTER-CABLE #ad |
Manufacturer | Porter-Cable Reconditioned #ad |
Height | 1 Inches |
Length | 1 Inches |
Width | 1 Inches |
Part Number | 514007535 |
Model | 514007535 |
More information #ad
6. Jet
#ad
Jet JMG-14 Bandsaw Miter Gauge 708716
#adJet #ad - Backed by 5-year warranty. Can be used for both straight and angled cutting. Ships at 2. 2-pounds. Accessory for jet jwbs-14OS 14-inch band saw. Jet bandsaw miter gauge.More information #ad
Brand | Jet #ad |
Manufacturer | JET #ad |
Height | 4 Inches |
Length | 13.5 Inches |
Weight | 2 Pounds |
Width | 5.7 Inches |
Part Number | 708716 |
Model | 708716 |
More information #ad
7. Fulton
#ad
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
#adFulton #ad - When not in use the flip stop can be flipped up and out of the way. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, pull the spring loaded indexing pin outward, adjustable, rotate the head to the desired position, 45, 60, 67.5 and 90 degrees. Together these three items are the perfect compliment to each other for your table saw cutting needs. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
More information #ad
Both ends of the fence are cut at exactly 45 degrees. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading. This allows you to position the fence extra close to the saw blade with the power turned off so you have even more control over the workpiece you are cutting. Standard miter slots not craftsman or sears brands are 3/4” x 3/8” with a 1/8” “T” slot slight variances from brand to brand running the length on the bottom of the slot. The fulton miter gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs. The aluminum miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge.
Brand | Fulton #ad |
Manufacturer | Fulton Woodworking Tools Inc. #ad |
Part Number | 11567 |
Model | 11567 |
More information #ad
8. Skil
#ad
SKIL 3410 Table Saw Replacement Miter Gauge Assembly # 2610011708
#adSkil #ad - New, bulk Packed. Includes 1 2610011708 Miter Gauge. Consult owners manual for proper part number identification and proper installation. Please refer to list for compatibility. Genuine Skil Replacement Part.More information #ad
Brand | Skil #ad |
Manufacturer | Chervon #ad |
Height | 3.13 Inches |
Length | 12 Inches |
Weight | 0.38 Pounds |
Width | 12 Inches |
Part Number | 2610011708 |
More information #ad
9. RYOBI
#ad
Ryobi BS904 Band Saw Replacement Miter Gauge Assembly # 089120406701
#adRYOBI #ad - Includes 1 089120406701 Miter Gauge. Please refer to list for compatibility. Consult owners manual for proper part number identification and proper installation. Genuine Ryobi Replacement Part. New, bulk Packed.More information #ad
Brand | RYOBI #ad |
Manufacturer | Techtronic Industries #ad |
Height | 8 Inches |
Length | 5.5 Inches |
Weight | 0.25 Pounds |
Width | 5.5 Inches |
Part Number | 89120406701 |
More information #ad
10. RIKON Power Tools
#ad
RIKON Professional Miter Gauge, 13-912
#adRIKON Power Tools #ad - Miter gauge - this adjustable aluminum support plate is a perfect locking mechanism and helps your workpiece cut at the precise angle you want. Versatile - whether you have a band saw or table saw this miter gauge will work well and help you achieve the perfect cut.More information #ad
It fits standard t-slot ¾” x ⅜” miter slots. Standard t-slot - correct your cuts with this adjustable aluminum support plate. This miter gauge is easy to use and you will see results immediately. Easy to use - don’t ever make a mistake cutting a straight line again.Brand | RIKON Power Tools #ad |
Manufacturer | Rikon #ad |
Height | 2.3 Inches |
Length | 12.2 Inches |
Weight | 1.5 Pounds |
Width | 4.7 Inches |
Part Number | 13-912 |
Model | 13-912 |
More information #ad