Top 10 1U Cable Management – Cable Raceways

As an Amazon Associate I earn from qualifying purchases.

1. RAISING ELECTRONICS

#ad

Raising Electronics 1U Horizontal Rack Mount Cable Management Unit with Panel Plastic 19" Rack Mount

#ad
RAISING ELECTRONICS #ad - Mounting screws included. Accommodates tower units, monitors, and other equipment. Light weight and durable, premium quality craftsmanship. Material:Panel Plastic. An included plastic panel cover offers your system a more neat and organized look. Fits 19” standard equipment. Panel included included:unit with 12 slots for more flexibility.
BrandRAISING ELECTRONICS #ad
ManufacturerRaising Electronics #ad
Height2 Inches
Length19 Inches
Width3 Inches
Part Number981500118
ModelCA981500118

2. NavePoint

#ad

NavePoint 1U Horizontal 19-Inch Rack Mount Cable Management Raceway Duct Panel with Cover Black

#ad
NavePoint #ad - Quantity: 1 panel. Rack screws Included. Light weight, easy to install or remove. Mounts onto a standard 19” rack. Ideal tool to organize and support the horizontal cables at the back of your equipment rack.
BrandNavePoint #ad
ManufacturerNavePoint #ad
Height0.63 Inches
Length19 Inches
Weight0.5 Pounds
Width2.6 Inches
Part Number400487685
ModelFBA_400487685

3. iFJF

#ad

All Metal, Rack Mount Horizontal Cable management with mounting screws 12 large slot Cable Manager Finger Duct Server cable management pack of 2, 1U 19 Inch Server Rack Wire Management System

#ad
iFJF #ad - 1. 4 pound per set, no plastic!! - 1u 12 lager slot, full metal with baking paint, steel panel, Steel cover, Capacity Cable Management With Panel. Made of cold rolled steel, Rounded edge without cutting cable, Durable and will never rust. All metal, no plastic, Much stronger! Mounting screws included for easy installation, Dimension: 2. 8* 1. 75 * 19 inch; fits in any standard 19 rack mount, server cabinet, server shelf and more.
BrandiFJF #ad
ManufactureriFJF #ad
Part Numberserver-rack-cage-nuts

4. NavePoint

#ad

NavePoint 1U Horizontal 19-Inch Rack Mount Cable Management Panel with 4 D-Rings 2-Inches Deep Black

#ad
NavePoint #ad - Ideal tool to organize and support the horizontal cables at the back of your equipment rack. Mounts onto a standard 19” rack. Quantity: 1 panel. Rack Screws Included. Light weight, easy to install or remove. Four slip clip D-Rings fixed on front.
BrandNavePoint #ad
ManufacturerNavePoint #ad
Height4 Inches
Length20 Inches
Weight1.25 Pounds
Width4 Inches
Part Number400465211
Model400465211

5. NavePoint

#ad

NavePoint 1U Metal Rack Mount Horizontal Cable Manager Duct Raceway for 19 Inch Server Rack

#ad
NavePoint #ad - Mounts onto a standard 19” rack. Ideal tool to organize and support the horizontal cables at the back of your equipment rack. Quantity: 1 panel. Rack screws Included. Light weight, easy to install or remove.
BrandNavePoint #ad
ManufacturerNavePoint #ad
Height19.5 Inches
Length4 Inches
Weight1.75 Pounds
Width3 Inches
Part Number400447895
Model4330219211

6. StarTech

#ad

Rack Cable Organizer / Manager CMDUCT1UX,Black, StarTech.com 1U Horizontal Finger Duct Rack Cable Management Panel with Cover, Server Rack Cable Duct

#ad
StarTech #ad - Removable top cover. Add or remove bundled cables quickly, with a removable top cover. Finger duct plus rear pass-through holes for routing cables. Perfect for bundled cables: The cable organizer features a removable top cover that makes it easy to add or remove bundled cables quickly.

Taa compliant: this taa compliant product adheres to the requirements of the US Federal Trade Agreements Act TAA, allowing government GSA Schedule purchases. Increase the longevity of your server and networking equipment interfaces by providing cable strain relief. 1u rack design. Sturdy steel construction. Sturdy construction: made of high-quality steel, the 1U horizontal finger duct rack cable manager is a durable solution for your server room or wiring closet. Separate and route cables easily, using the fingers on either side or the rear pass-through holes.

Mounts to standard 19" 2 or 4-post server racks. Advanced cable management: the covered cable duct offers a series of fingers on either side, as well as pass-through holes at the back to help you route your cables where you need them. The startech. Com advantage: startech. Com offers a 2-year warranty on this 1U Cable Management Panel and has been the choice of IT professionals and businesses for over 30 years.
BrandStarTech #ad
ManufacturerSTARTECH.COM #ad
Height2.56 Inches
Length22.44 Inches
Weight1.94 Pounds
Width3.46 Inches
Part NumberCMDUCT1UX
ModelCMDUCT1UX
Warranty2 year warranty

7. NEAT-PATCH

#ad

Neat Patch Mini 1U Low Profile Cable Management Unit

#ad
NEAT-PATCH #ad - Especially designed for server racks and enclosures with limited available space. Eliminates the need to use wire managers such as plastic finger ducts riveted to metal or metal D-Rings. Order for 1 neat patch mini 1U Low Profile Cable Management Unit. Surges and grounding electrical issues eliminated by unique non-conductive one piece molded design. Creates a balanced patching environment by providing 24 port cycles which allow single coil circuits to be stored in the rack. The neat patch mini only requires 1U of rack space.
BrandNEAT-PATCH #ad
ManufacturerNEAT-PATCH #ad
Part NumberNP1
ModelNP1

8. CCCEI

#ad

1U Metal Rack Cable Management, 24 Slot Finger Duct 19Inch Server Rack Shelf, Horizontal Cable Rack Mount Manager with Screws.

#ad
CCCEI #ad - Value for money socket and will provide quality after-sales service. 1u rack cable management with 24 slot finger duct and cover. 24 slot enough to deal with complex cable, easy to install and manage. 19inch length and w 1. 75inch * H 1. 75inch, fit standard 1U rack mountable. Made of cold rolled steel and can adjust the tightness, come with screws.
BrandCCCEI #ad
ManufacturerCCCEI #ad

9. Electriduct

#ad

Brushed Grommet 1U Cable Manager Server Rack Wire Management System bristles keep component clean

#ad
Electriduct #ad - Rack unit: 1U. Dimensions:19"w x 1. 75"h x 0375"l. Horizontal Cable Manager. Style: Brushed Grommet. All iron construction.
BrandElectriduct #ad
ManufacturerElectriduct #ad
Height2 Inches
Length0.75 Inches
Width19 Inches
Part NumberQWM-ED-WM-1BR
ModelQWM-ED-WM

10. StarTech

#ad

StarTech.com 1U Horizontal Cable Management, TAA Compliant, Server Rack Cable Organizer with Hook and Loop Fastener Strips CMVELC1U, Black

#ad
StarTech #ad - Universal cable management solution: the 1U hook and loop cable management with hook and loop fabric fasteners, mounts to a standard 19" 2 or 4-post rack to organize cables. The startechcom advantage: startechcom offers a 2-year warranty and free lifetime technical support on this cable organizer, and has been the choice of IT professionals for over 30 years.

Mounts to standard 19" 2 or 4-post server racks. Simple installation: for easy installation, this 1U horizontal cable management panel comes complete with 2 sets of rack screws 10/32 and 12/24. Improve the efficiency of your cooling system by covering unused rack space. Takes up only 1U of rack space.

Includes rack screws. Taa compliant: this taa server rack cable management panel adheres to the requirements of the US Federal Trade Agreements Act TAA, allowing government GSA Schedule purchases. Sophisticated design: constructed of high quality steel with 4 fabric fasteners, the data center cable management panel enables you to bundle and route cables as needed for simple cable organization. Sturdy steel construction.
BrandStarTech #ad
ManufacturerSTARTECH.COM #ad
Height0.98 Inches
Length19.29 Inches
Weight1.01 Pounds
Width1.97 Inches
Part NumberCMVELC1U
ModelCMVELC1U
Warranty2 year warranty